Instructions / Assembly

Remove the washer, nut, and two aking screw from the rear

deck. Attach the rear deck to the main frame by aligning the

rear axle against the ‘C’ shaped support at the end of the main

frame, then rotate the rear deck so that the attachment bolt

protrudes through the frame. Insert the two aking screws,

and secure the frame with the washer and locknut.

Position saddle on frame with carriage bolt protruding through

centre hole in frame. Tighten knob onto carriage bolt to lock

saddle in position. Saddle adjustment can be achieved by re-

moving the saddle-adjustment knob are re-tightening the knob

and saddle in desired hole.

Step 1

Step 2