Instructions / Assembly

3 Assembly
22
Figure 3.12
ATTACHING THE FRONT FENDER
AND HEADLIGHT
NuedFrontWheelwithRoundFenderBrace
❶ Posion the front fender so the fender bracket is
on the inside of the frame. Align the hole in the bracket to
the hole in the fork crown. Figure 3.12
❷ Align the hole in the headlight base with the hole in the
fork crown.
❸ Place a washer on the screw and insert the screw through
the headlight, fork crown and fender bracket.
❹ Place a washer on the screw.
❺ Place the hex nut on the screw and ghten.
❻ Place the rounded fender braces over the small hole on the
back of the fork dropout.
❼ Insert the small screws through the rounded fender brace
and screw into the fork dropout.
❽ Aach the wheel and rmly fasten the fender in place.
Washer
Fender
bracket
Washer
Headlight
Hex nut
Screw
3
2
1
4
7
6
7
5
Round
fender
brace