Instructions / Assembly

4 Adjustments
44
Figure 4.30
Figure 4.31
Figure 4.29
ADJUSTING THE HANDLEBAR
Adjusng the Handlebar Height
Instrucons for adjusng the handlebar height depend on
whether your bicycle has a quill or clamp (threadless) stem.
Figure 4.29 and 4.30
WARNING!
• Improper adjustment of the handlebar may result in
damage to the stem post, steerer tube and result in loss of
control, serious injury or death. Ensure the minimum
inseron marks on the stem post are not visible above the
top of the headset.
• Failure to properly ghten handlebar components may
result in loss of control, serious injury or death. Always
check the handlebar cannot move and is secured to the
frame before riding the bicycle.
Align the Handlebar (with quill stem)
❶ Stand in front of the handlebar and hold the front wheel
between your legs.
❷ Using a 6 mm Allen wrench, loosen the stem binder bolt
and move the handle bar le or right unl it is aligned with
the front wheel. Figure 4.31
❸ Tighten the stem binder bolt and check the handlebar is
securely aached and cannot move.
Quill Stem Threadless Stem
Handlebar binder bolt(s)
Handlebar
binder
bolt(s)
Pinch
b i n d e r
bolts
Stem
binder
bolt
Stem binder bolt
Move the
handlebar le or
right unl it is
aligned with the
front wheel
Steerer
tube
2