Instructions / Assembly

Adjustments 4

Figure 4.32

Figure 4.33

Adjust the Handlebar Angle (all stem types)

❶ Using a 6 mm Allen wrench loosen the handlebar binder

bolt(s). Figure 4.33

❷ Rotate the handlebar into the desired posion.

❸ Check that the handlebar is centered to the frame and front

wheel. Sit on the seat and check your reach to grips, shiers

and brakes. Refer to Secon 1, Fig. 1.2: Seat Height and

Handlebar Reach for guidelines.

❹ Tighten the handlebar binder bolt(s) and check the

handlebar is securely aached and cannot move.

Align the Handlebar (with threadless stem)

❶ Stand in front of the handlebar and hold the front wheel

between your legs.

❷ Using a 6 mm Allen wrench, loosen the pinch binder bolts

and move the handlebar le or right unl it is aligned with

the front wheel. Figure 4.32

❸ Tighten the stem binder bolt and check the handlebar is

securely aached and cannot move.

Pinch binder

bolts

Move the

handlebar le

or right unl

it is aligned

with the front

wheel

Loosen handlebar

binder bolt(s)