Instructions / Assembly
4 Adjustments
46
Figure 4.35
Figure 4.34
Adjust the Handlebar Angle (with adjustable handlebar)
❶ Using a 5 mm Allen wrench loosen the bolt at the front of
the stem. Important: Do not loosen the bolts on the side of
the stem. Figure 4.34
❷ Grasp the stem of the handlebar and rotate to the desired
angle. Figure 4.35
❸ Re-ghten the handlebar bolt at the front of the stem, and
check the handlebar is securely aached and cannot move.
❹ Once you have adjusted the angle of the handlebar check
the angle of the reector (if mounted on the handlebar) and
cables to be sure they are facing forward. Refer to Secon 1,
Fig. 1.2: Seat Height and Handlebar Reach for guidelines.
2
1
3
Do not loosen
the side bolts
Grasp here
and rotate to
desired angle