Owner's Manual

Attach the Front Fender

Parts: Front fender, main frame

Hardware: washer, long screw, small screw,

Tools: Phillips head screwdriver or 10mm hex wrench

See the facing page for diagrams of the following steps.

1. Removetheforkprotector(notshown).

2. Lift the brake noodle and cable out of the

brake carrier.

3. Remove the fender hardware from the fork

(bolt,washer).

4. Position the front fender so the attachment bar is

on the inside of the main frame, and aligns with the

threaded screw hole of the fork.

brake

noodle

brake

carrier

Schwinn Meridian Manual R3 0918112.indd 15 9/18/12 3:44 PM