Owner's Manual

Attach the Wire Basket

Basket should not be used to carry people or pets.

Parts: Wire basket, rear frame

Tools: Phillips Head screwdriver

Hardware: 4 screws, 4 washers The hardware comes

attached to the frame. Remove the hardware

before you begin this procedure.

1. Place the wire basket on the rear frame and align

the slots on the basket with the threaded screw

holes in the frame.

Note:Theslotsonthewirebasketarepositioned

so the basket can only be attached one way. If the

slots do not line up properly rotate the basket 180

degrees.

2. Insert a washer onto the screw.

3. Insert the screw and washer through the basket slots

onto the threaded screw hole on the rear frame.

4. Repeat steps three and four for the remaining

washers and screws.

WARNING!

Schwinn Meridian Manual R3 0918112.indd 29 9/18/12 3:44 PM