Table of Contents A Company Overview…….…………………………………………………….. A 1 On-Off Thermostats …….…..……………………………………………….. 1-x 2 On-Off Thermostats – Programmable…….…………………………….… 2-x 3 Proportional Thermostats…….…………………………………….……….. 3-x 4 Humidity Controllers…….……………………………………………..…….. 4-x 5 Fan Coil – Stand Alone Controllers…….………………………………..….. 5-x 6 A/C Stand-Alone Controllers…….…………………………….…………….. 6-x 7 Maxinet – Thermostat Network…….……………………………………….. 7-x 8 Communication / B.M.S. …….……………….……….
On/Off Thermostats ETN-24-SUPER-SH Wall mount, 24VAC thermostat, Cool/Heat or Cool Only configuration, 1 or 3 fan speeds AC The ETN-24-SUPER-SH thermostat is a fully featured, stylish thermostat suitable for light commercial, residential or apartment applications. COOL It can control a large variety of HVAC systems with different configurations. It offers both Cooling Only or Cool & Heat control systems. It also has selectable number of heating and cooling stages and multiple Fan Speeds.
On/Off Thermostats ETN-24-SUPER-SI Wall-mount, 24VAC thermostat, Cool & Heat or Heat Pump- selectable, multiple heating & cooling stages, Auto-Fan selectable, IR option The ETN-24-SUPER-SI thermostat is a fully featured, stylish thermostat, suitable for light commercial, residential or apartment applications. COOL HEAT It can control a large variety of HVAC systems with different configurations; both Cool & Heat or Heat Pump systems and has a selectable number of heating and cooling stages.
On/Off Thermostats ETN-24-SUPER-SF Wall mount, 24VAC thermostat, H/C or Heat Pump configuration, with Filter counter The ETN-24-SUPER-SF thermostat is a fully featured, stylish thermostat suitable for light commercial, residential or apartment applications. COOL HEAT It can control a large variety of HVAC systems with different configurations. It is applicable both for Cool/Heat or Heat Pump systems and has a selectable number of heating and cooling stages.
On/Off Thermostats FMH-220-HP11-3S-IR Flush Mount thermostat, 220VAC, Heat & Cool AC outputs (Heat Pump configuration) with 3 fan speeds and IR COOL The FMH-220-HP11-3S-IR is a fully featured, flushmount thermostat suitable for commercial or residential applications to control a large variety of HVAC systems. This easy to operate thermostat has one output for Cool and one output for Heat Pump (On/Off), 3 fan speeds and IR option.
On/Off Thermostats FMH-24-C2-3S-IR Flush Mount Thermostat, 24VAC, Cool only - AC two outputs for Cool, 3 fan speeds and IR option COOL The FMH-24-C2-3S-IR is a fully featured, flushmount thermostat suitable for commercial or residential applications to control a large variety of HVAC systems. It is targeted for Cool and Fan Only applications and has ECONOMY 2 outputs for Cool and 3 fan speeds.
On/Off Thermostats FMH-220-HC11-3S-IR Flush Mount, 220VAC thermostat with Heat and Cool outputs, 3 fan speeds and IR option The FMH-220-HC11-3S-IR is a fully featured, flushmount thermostat suitable for commercial COOL or residential applications to control a large variety of HEAT HVAC systems. This easy to operate thermostat has one output for Cool and one output for Heat Element (On/Off), 3 fan speeds and IR option.
On/Off Thermostats FMT-24-SUPER AC 24VAC, Flush-mount thermostat, with up to 3 stages for Heat and 2 stages for Cool The FMT24-SUPER thermostat is a flush- mount, stylish thermostat for commercial or residential applications. It has both Heat/Cool and Heat Pump configurations and multiple cooling and heating stages. It offers useful features for cold locations, such as Low Temperature Alarm and Emergency Heat.
On/Off Thermostats ERT-208 Wall mount, 230VAC thermostat, with 2 compressors - Heat-Pump configuration, 1 fan speed, 12-hour timer and a Remote Control option. COOL The ERT-208 is a fully featured, stylish thermostat HEAT suitable for Central Mini-Duct or Split-Unit A/C systems. It has 2 compressors – heat pump configuration with 1 fan speed, 12-hour timer and a remote control option. The ERT-208 is an easy to use thermostat, with a large, AUTO FAN easy to read LCD display.
On/Off Thermostats ERT-209 Wall mount, 230VAC Thermostat, AC with 2 compressors for Cooling and 2 Heat Elements, Timer and IR (option) COOL The ERT-209 is a fully featured thermostat suitable for Central Mini-Duct or Split-Unit AC systems. HEAT It has outputs for 2 compressors and 2 Heat Elements – H/C configuration, 1 fan speed, 12-hour timer and a remote control option. The ERT-209 is an easy to use thermostat, with a large, easy to read display.
On/Off Thermostats ERT100-LCD-IR AC Wall mount, 230VAC Thermostat, Heat-Pump configuration, 12-hour timer and an option for a Remote Control Unit. COOL The ERT100-LCD-IR is a fully featured thermostat HEAT suitable for central mini-duct or split-unit AC systems. It has heat pump configuration, 3 fan speeds, 12-hour timer and a remote control option. AUTO FAN The ERT100-LCD-IR is an easy to use thermostat with a clear, easy to read LCD display.
On/Off Thermostats TED-220-HP11-3S Wall mount, 220VAC thermostat, with 2 outputs for AC Cool & Heat (Heat Pump), 3 fan speeds and LCD display FC The TED-220-HP11-3S thermostat is suitable for commercial or residential applications to control a large variety of HVAC COOL systems, including fan coils. HEAT This mechanical thermostat offers Cool and Heat outputs as well as 3 fan speeds, making the TED-220-HP11-3S the perfect solution for basic and simple climate control.
On/Off Thermostats TED-220-HC11-3S Wall mount, 220VAC thermostat, with AC temperature display suitable, for fan coil applications and Air Conditions with H/C FC configurations (no Heat Pump). The TED-220-HC11-3S thermostat is suitable for COOL commercial or residential applications to control a large variety of HVAC systems, including fan coils.
On/Off Thermostats TED-24-SUPER Wall-mount, 24VAC thermostat, for both AC applications as well as Fan Coils. AC The TED-24-SUPER thermostat suits commercial or FC residential applications to control a large variety of HVAC systems, including fan coils. COOL This mechanical thermostat offers up to 2 stages for Cool HEAT and 2 stages for Heat, making the TED-24-SUPER the perfect solution for basic and simple climate control.
On/Off Thermostats TED-220-C1-3S Wall mount, 220VAC thermostat, with temperature display, suitable for Fan Coil applications (Cool only) COOL The TED-220-C1-3S thermostat is suitable for commercial or residential applications to control a large variety of Fan Coil systems. ECONOMY This mechanical thermostat offers an output for Cool °C as well as 3 fan speeds, making the TED-220-C1-3S the perfect solution for basic and simple climate control in Cool Only configuration systems.
On/Off Thermostats TED-24-AUTO-SUPER Wall-mount, 24VAC thermostat, with 2 outputs for AC Heat and 1 output for Cool with 1 fan speed (24VAC) The TED-24-AUTO-SUPER thermostat suits commercial or residential applications to control a large variety of HVAC systems. HEAT This mechanical thermostat offers 1 stage for Cool and 2 stages for Heat. Its easy to change configuration, using only jumpers, makes the TED-24-AUTO-SUPER the perfect AUTO FAN solution for basic and easy climate control.
On/Off Thermostats TES-220-HC11-3S Wall mount, 220VAC thermostat, for Air Conditioning & Fan Coil applications. AC The TES-220-HC11-3S thermostat suits FC commercial or residential applications and can control a large variety of HVAC systems, COOL including fan coils. HEAT This mechanical thermostat offers Cool and Heat outputs as well as 3 fan speeds, making the TES-220-HC11-3S the perfect solution for basic and simple climate control.
On/Off Thermostats - Programmable ETN-24-SUPER-3S-FP-PROG-EU-C 24VAC, wall-mount thermostat, with 5-1-1 days, AC Europe-type weekly program built-in, with Freeze Protection, for multiple HVAC configurations FC The ETN-24-Super-3S-FP-Prog-EU-C is an aesthetic, easy to use thermostat for commercial and residential applications.
On/Off Thermostats - Programmable ETN-24-SUPER-PROG-EU Series 24VAC, wall-mount thermostat, AC with 5-1-1, Europe-type weekly program built-in and multiple Cooling and Heating stages COOL The ETN-24-Super-Prog-EU is a stylish thermostat well suitable for commercial and residential applications. It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and offers a selectable number of heating and cooling stages.
On/Off Thermostats - Programmable ETN-24-SUPER-PROG-7DAYS-US Series 24VAC, Wall mount thermostat with 7-days, AC USA-type weekly program built-in and multiple Cooling and Heating stages COOL The ETN-24-Super-Prog-7 Days-US is a stylish thermostat that is well suited for commercial and residential applications. It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and offers a selectable number of heating and cooling stages.
On/Off Thermostats - Programmable ETN-24-SUPER-PROG-US Series 24VAC, wall-mount thermostat AC with 5-1-1, USA-type weekly program built-in and multiple Cooling and Heating stages The ETN-24-Super-Prog-US is a stylish thermostat COOL well suitable for commercial and residential applications. It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and offers a selectable number of heating and cooling stages.
On/Off Thermostats - Programmable FMT-24-SUPER-PROG Flush-mount, 24VAC thermostat, 5-1-1 AC programmable, with various selectable A/C configurations The FMT-24-SUPER-PROG is a stylish thermostat suitable for commercial and residential applications. It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and offers a selectable number of heating and cooling stages.
On/Off Thermostats - Programmable ETN24-HC21-PROG-ECO Wall-mount, 24VAC thermostat, with weekly program built-in and fresh air damper output The ETN-24-HC21-PROG-ECO is a fully featured, stylish thermostat, suitable for commercial DAMPER CONTROL and residential applications. It can control a large variety of HVAC systems with different configurations. It offers a selectable number of heating and cooling stages and a HEAT fresh Air Damper output - damper opens automatically °F or manually.
On/Off Thermostats - Programmable ETN24-HC21-PROG-OA 24VAC, wall-mount thermostat, with 5-1-1 USA- AC type weekly program built-in and fresh air damper output. The ETN-24-SUPER-PROG-OA is a fully featured, stylish thermostat suitable for industrial, commercial and COOL residential applications. HEAT It can control a large variety of HVAC systems with different configurations; Cool, Heat (Electric or Gas) systems.
On/Off Thermostats - Programmable ETN24-HC21-PROG-TS 24VAC, wall-mount thermostat, with 5-1-1 USAtype weekly program built-in and special damper control in Heat mode. DAMPER CONTROL The ETN-24-SUPER-PROG-TS is a fully featured and stylish thermostat, especially designed for two-story residential applications. Thermostat on first floor, remote sensor on second HEAT floor and motorized damper in duct system.
On/Off Thermostats - Programmable CTR-24-SUPER Wall mount, 24VAC thermostat, programmable, with AC an extra connection for an IR for a remote control from a second location The CTR-24-SUPER thermostat offers a selectable number of heating and cooling stages for Heat Pump or Heat/Cool HEAT systems. The CTR-24-SUPER enables connection of an extra IR receiver ECONOMY panel for remote control from a second location.
On/Off Thermostats - Programmable BDIR-24-SUPER-PROG Wall-mount, 24VAC thermostat, AC with 5-1-1 USA-type Weekly Program built-in, operable via Remote Control only. The BDIR-24-Super is a stylish thermostat, ideally HP/HC suitable for commercial applications, as it is operable via IR remote control only. It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and offers a selectable number of heating and cooling stages.
On/Off Thermostats - Programmable - Voice & Phone CEO-24-HC22 “Talking Thermostat” with telephone & voice AC capabilities, “call-out” options and 5-1-1 weekly programmable. Perfect for controlling temperature in second home COOL The CEO-24-HC22 thermostat brings you the state of the art technology in capabilities. It thermostat is the with perfect telephone choice for and voice HEAT controlling temperature in your second home, cabin, condo or office from a remote location.
On/Off Thermostats - Programmable - Voice & Phone CEM-24-SUPER “Talking Thermostat” with telephone and voice options, and 5-1-1 weekly programmable, perfect for controlling temperature in second home The CEM-24-SUPER thermostat brings you the state of the art technology in thermostat with telephone and voice capabilities. It is the perfect choice for controlling temperature in your second home, cabin, condo or office from a remote location.
On/Off Thermostats - Programmable - Voice & Phone CEV-24-SUPER Wall-mount, 24VAC thermostat loudspeaker, especially with designed for built in AC visually- impaired individuals. COOL The CEV-24-SUPER brings the latest technology in room temperature control and is perfectly suitable for residential HEAT and commercial applications. With voice option and built-in speakers, the CEV-24-SUPER is ideal for visually impaired individuals.
Proportional Thermostats 0-10V ETN-24-P/PD-FC-SUPER2 Wall mount, 24VAC thermostat, for all Fan Coil Proportional valve applications. The ETN-24-P/PD-FC-SUPER2 is a fully featured, advanced thermostat suitable for light commercial, residential or apartment systems to control a wide array of Fan Coil applications. This superior thermostat offers various configurations HEAT according to customer's requirements, applicable by DIP 1/2/3 switches.
Proportional Thermostats 0-10V ETN24-PH-FC-SUPER Wall-mount, 24VAC thermostat, with proportional output for Cool (0-10VDC), onoff output for Heat. Suitable for Cool/Heat or Cool Only applications The ETN24-PH-FC-SUPER is an advanced, energy saving thermostat suitable for light commercial, residential or apartment systems to control Cool/Heat or Cool Only, Fan Coil applications.
Proportional Thermostats 0-10V FMH-24-P-1S Flush-mount 24VAC Thermostat, with 2 separate FC proportional outputs for Cool & Heat (0-10VDC) and 1 fan speed. COOL The FMH-24-P-1S is a fully featured thermostat suitable for light commercial, residential or apartment applications. It HEAT has 2 proportional outputs for Cool and Heat (0-10VDC) 0-10V and 1 fan speed. It is a smart looking, flush mount OUTPUT thermostat, with a soft aesthetic shape and a large, easy to read LCD display.
Proportional Thermostats 0-10V FMH-24-PD-1S Flush-mount, 24VAC thermostat, with a single proportional output for both Cool and Heat and 1 fan speed. 0-10V OUTPUT The FMH-24-PD-1S is a fully featured, easy to operate thermostat suitable for light commercial and COOL residential applications. It offers 1 proportional output for both Cool and Heat (0-10VDC or 2- HEAT 10VDC) and 1 fan speed. It is an attractive, flush mount thermostat, with a large and easy to read display.
Proportional Thermostats 0-10V FMT-24-PD-3S Flush-mount, 24VAC thermostat, with a single proportional output for both Cool & Heat and 3 fan speeds. The FMT-24-PD-3S is a fully featured, stylish thermostat suitable for light commercial, residential or apartment, 2-pipe fan coil applications. It offers 1 proportional HEAT output for both Cool and Heat (0-10VDC or 2-10VDC) and 3 fan speeds.
Proportional Thermostats 0-10V ETN-24-P-1S (Cool Only) VAV Wall-mount thermostat for VAV applications, with 1 proportional output (0÷10VDC) for Cool only The ETN-24-P-1S (Cool Only) thermostat is a fully 0-10V featured and stylish thermostat suitable for light OUTPUT commercial, residential or apartment applications. COOL This thermostat has proportional output for Cool (010VDC or 2-10 VDC), large, easy to read display and a hand held remote control.
Proportional Thermostats 0-10V TED-24-P-3S (FAN 230 VAC) Wall-mount, 24VAC thermostat, with 2 proportional outputs for Cool and Heat (0-10V) and 3 fan speeds (230VAC). The TED-24-P-3S is an attractive, fully featured thermostat suitable for light commercial, residential or apartment applications. It has two proportional outputs for Cool and Heat and 3 fan speeds. HEAT All these qualities make the TED-24-P-3S the perfect solution for basic and easy climate control.
Proportional Thermostats 0-10V TED-24-P-3S-Cool Only (FAN 230 VAC) Wall-mount, 24VAC thermostat, with 1 proportional output for Cool only (0-10V) and 3 fan speeds (230VAC) The TED-24-P-3S-Cool Only is a fully featured, easy to operate thermostat suitable for light commercial, residential or apartment applications. It has one proportional output for Cool Only and 3 fan speed outputs, 230 VAC. It is an attractive, wall mount thermostat, with a large easy to read display.
Proportional Thermostats - 3 wires ETN-24-PM2 series Wall-mount, 24VAC thermostat with 2 separate FC proportional outputs for Cool & Heat (3-wire) and 1 or 3-fan speeds COOL The ETN-24-PM2 Series is suitable for light commercial or residential applications. It offers 2 proportional outputs HEAT (3-wire) for Cool & Heat valves and 1 speed or 3 speeds, 24VAC fan. AUTO FAN 3-WIRE OUTPUT The ETN-24-PM2 is an attractive thermostat with a large, easy to read, display.
Proportional Thermostats - 3 wires ETN-24-PMHP Wall mount, 24 VAC thermostat, for 2-pipe FC systems, with 1 proportional output (3-wire, 24VAC) for Heat and a compressor with Heat Pump output for Cool The ETN-24-PMHP is well suited for commercial or °C residential applications. °F It offers 1 proportional output (3-wire, 24VAC) for Heat and a compressor with Heat Pump output for COOL Cool. It is suitable for 2-pipe systems only and has 1 fan speed or 2 fan speeds, 24 VAC.
Proportional Thermostats - 3 wires ETN-24-P/PM-1S (Cool Only) Wall mount, 24VAC thermostat, with 0-10VDC VAV output for Cool and 3-wire output for damper control 0-10V OUTPUT The ETN-24-P/PM-1S (Cool Only) thermostat is a fully featured and stylish thermostat suitable for light COOL commercial, residential or apartment applications. ECONOMY It offers a proportional output for Cool (0-10VDC) as well 1 as another 3-wire proportional output, ideal for dampers.
Proportional Thermostats - 3 wires ETN-24-PMH series Wall mount, 24 VAC thermostat, for 2-pipe systems, with 1 proportional output (3-wire, 24VAC) for Cool and an on/off output for Heat COOL The ETN-24-PMH Series is well suited for commercial or residential applications. HEAT It offers 1 proportional output (3-wire, 24VAC) for 1/3 Cool and an on/off output for Heat. It is suitable for SPEEDS 2-pipe systems only and has 1 fan speed or 3 fan speeds, 24 VAC.
Humidity Controllers CHU-24-SUPER Wall-mount, 24 VAC thermostat, for controlling AC Temperature & Humidity, weekly programmable The CHU-24-SUPER thermostat is a combined Temperature COOL & Humidity controller. It offers a selectable number of heating and cooling stages as well as an output for humidifier or de-humidifier. The CHU-24-SUPER has a built-in humidity sensor, which allows adjustment of a Humidity Set Point.
Humidity Controllers ERHU-55 Wall-mount, 12VDC Humidity Controller for de-humidification only. HUMIDITY The ERHU-55 is a Humidity controller with a built-in humidity sensor and an output for de-humidification via a compressor. The ERHU-55 allows users to adjust Humidity Set Point and the desired fan speed. The main input and outputs are 12VDC, and therefore the ERHU-55 must be used with power supply PS102.
Humidity Controllers DEH-2000 HUMIDITY Wall-mount, 24VAC, humidity ONLY controller with °C Fresh Air Damper output and weekly program built-in. °F The DEH-2000 has a built-in humidity sensor, which allows adjustment of a HUMIDITY SET POINT. It offers a DAMPER CONTROL humidifier and de-humidifier output (24VAC) as well as a weekly program for the operation of Fresh Air Damper.
Humidity Controllers ETN-24-P-3S-HU Wall-mount, 24VAC, temperature and humidity AC controller (de-humidification only), with proportional integral outputs for Cool and Heat COOL It offers 2 separate Proportional Integral (0-10VDC) outputs and 3 Fan Speeds; one output for Cool & De-Humidification and another for Heat. With inputs for external temperature and humidity sensors, the ETN-24-P-3S-HU allows the user to adjust both Temperature and Humidity set points.
Humidity Controllers M5003-24VAC/12VDC AC Wall mount, 24VAC or 12VDC controller for Temperature & Humidity COOL The M5003 thermostat is a combined Temperature & Humidity controller, available in either 24VAC or 12VDC. The M5003 offers a selectable number of heating and cooling stages as well as 2 outputs for Humidifier and DeHumidifier. The M5003 allows adjustment of Humidity & DeHumidity set points and also offers weekly programming.
Humidity Controllers M5001-24-4X0-10VDC HUMIDITY Wall mount, 24VAC controller for Temperature & Humidity COOL The M5001-24-4X0-10VDC controller is a multipurpose display controller. It offers unique flexibility 0-10V and simplicity, allowing users proportional control of OUTPUT both temperature and humidity. The M5001-24-4X0-10VDC offers 4 different ECONOMY proportional outputs; Cool, Heat, Humidifier and De- °C humidifier.
Fan Coil Stand Alone Controllers FMH-FC-SUPER3 Flush-Mount, 230VAC or 110VAC Thermostat for all Fan Coil applications, with special input. FC The FMH-FC-SUPER3 series allows users the flexibility of having one main controller for most Fan Coil applications. It can be flush-mounted or installed directly into the Fan Coil, with an external sensor for the return air.
Fan Coil Stand Alone Controllers FMH220-P-FC-SUPER FC Flush-mount, 220VAC thermostat, with 0-10V proportional outputs for Fan-Coil valves and 3 Fan speeds COOL The FMH220-P-FC-SUPER is a highly versatile thermostat for Fan Coil applications. With numerous configuration options, HEAT it is an ideal solution for wholesalers to keep on stock and supply the proper configuration according to customer's ECONOMY specifications.
Fan Coil Stand Alone Controllers MIGA1-FC-SUPER Main Controller for Fan Coil applications, with optional hand-held remote control +IR panel, or wall or flush mount panels. COOL MIGA1-FC-SUPER is a main controller for various F/C applications. Together with a wall or flush mount HEAT thermostat panel or receiver and a remote control - this controller becomes highly attractive and an ideal 'general purpose controller'.
Accessories for MIGA1 ETN-MIGA-IR FC User interface for MIGA1 main board, with IR option AC The ETN-MIG-IR is a convenient user-interface for the MIGA1 main board. It is a wall mount, local control panel with an infra-red receiver option, making it ideal for any end-user. The ETN-MIG-IR is a smart looking thermostat panel with a soft aesthetic shape and a large, easy to read LCD display.
Accessories for MIGA1 FMH-MIGA-IR Flush mount, thermostat panel, serving as a FC user interface for Meitav-tec's MIGA1 main board, with an IR receiver option. The FMH-MIGA-IR is a flush mount, thermostat panel, functioning as a user interface for MIGA1 HEAT main board. It is a convenient local control panel with an infrared receiver option, making it ideal for any end-user. The FMH-MIGA-IR is a smart looking thermostat with a soft aesthetic shape and a large, easy to read LCD display.
Accessories for MIGA1 M1P IR Sticker Receiver Panel for MIGA1 main board COOL The M1P is a wall mount, infrared sticker receiver panel, with a quick connector to MIGA1 main board. HEAT It can be locally controlled via its On/Off button, or via an IR Remote Control (RT03).
Fan Coil Stand Alone Controllers FMH-FC-SUPER4 Flush-Mount, 230VAC or 110VAC Thermostat for all Fan Coil applications, with a special contact input. The FMH-FC-SUPER4 is a highly versatile thermostat suitable for various Fan Coil applications. It can be flushmounted or installed directly into the Fan Coil, with an external sensor for the return air and water temperature. The FMH-FC-SUPER4 also offers several DIP Switch selectable options to best suit customer's needs, e.g.
Fan Coil Controllers MIGA AB FC MIGA AB enables control of multiple fan-coil controllers, linked one to another, via a main panel. Ideal for open space applications, where all controllers need the same working parameters. COOL MIGA-AB controller is a smart, cost effective solution for HEAT multiple fan-coil control. ETN/MIGA AB master panel allows control of up to 60 MIGA controllers, which need COMM the same working conditions.
Fan Coil Controllers MIGA AB Wiring diagram www.meitavtec.com | info@meitavtec.
A/C Stand Alone Controllers MIGA1-AC-SUPER Main Controller for A/C applications, with optional AC hand-held remote control +IR panel, or wall or flush mount panels. COOL MIGA1-AC-SUPER is a main controller for various A/C applications. Together with a wall or flush mount thermostat HEAT panel or a receiver and a remote control - this controller becomes highly attractive, an ideal 'general purpose controller'.
Maxinet – Thermostat Network MCU Master Control Unit for stand alone applications or B.M.S Maxinet Router for up to 60 thermostats COMPATIBLE The MCU is a Master Control Unit for stand-alone COMM applications to control up to 60 thermostats or software applications. It is also applicable as a router for large network applications in Maxinet B.M.S., or just for simple divisions in installations such as floors or large buildings.
Maxinet – Thermostat Network ETN-C-24-SUPER-Maxinet protocol Wall mount, 24VAC thermostat for MaxiNet AC BMS system The ETN-C-24-Super is an attractive thermostat for COOL easy HVAC control with MaxiNet BMS system. Having most A/C applications built-in, field selectable HEAT and offering several stages of Cool and Heat and, the ETN-C-24-Super is suitable for either Heat/Cool or Heat Pump systems. B.M.
Maxinet – Thermostat Network PS1800- Main controller - MaxiNet protocol Main Controller for A/C and Fan coil in Building B.M.S Management System (BMS) application, with COMPATIBLE Maxinet protocol The PS1800 Family consist of main controllers, with MaxiNet Protocol, for A/C and Fan Coil MaxiNet BMS applications. It has a modular, user-friendly design with various A/C or Fan Coil applications built-in, field AC selectable.
7-4 Room panel (option) T3 0 0 PR 0 F1 Compressor 1 (0.5A) H. pump / H. element 1 (0.5A) High Medium Low common for the outputs N.C N.C X2 2 1 X1 16 15 14 13 12 11 ~F F2 0 F4 0 F5 0 F6 www.meitavtec.com | info@meitavtec.com 0 H. element 2 (0.5A) Not in use Outdoor fan / H. element 3 (0.5A) 0 Not in use Compressor 2 (0.5A) FMH-X500-02 F3 Fan (230VAC, 3A) 0 Communication Maxinet protocol 0 Heat pump configuration 7 OR 1 or 3 fan speeds 8 T2 Compressor delay 3.
Maxinet – Thermostat Network PS1800- Main controller - MaxiNet protocol PS1800-FC-SUPER-02 PS-1800-P-FC-SUPER (24VAC, 2.5VA) (24VAC, 2.
Maxinet – Thermostat Network CTU1800- Main Controller B.M.S - Maxinet protocol B.M.S Main DDC Controller for Maxinet BMS application COMPATIBLE The CTU 1800 are smart, ready to install controller, especially developed to work with the Maxinet SW. The CTU1800 family Pre-Programmed, "Plug and Play" to save valued time for the installers on site.
2 x Indication LEDs Configuration MAC Address Comm. RS-485 0 B A AI2 0 AI1 V2 AO2 0 AO1 7 8 3 2 1 PO4 COM PO3 PO2 COM PO1 COM 2 x Analog Outputs 0-10V Room Panel 2 x 3-Wire outputs 8 x Digital Outputs 0.5A Each Dry contact w/DO1 Common for D/O’s ETN-X500 5VDC Output 2 x Analog Inputs 0-10V T3 DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO1 X1 V1 OR 0 T2 0 T1 DI8 0 DI7 DI6 0 DI5 FMH-X500 3 x Temp.
Maxinet – Thermostat Network CTU1601 - Maxinet protocol Input Output card for Maxinet system with 8 outputs 230V, 8 inputs dry contact and 3 Temperature readings COMM The CTU-1601 is an Input Output (I O) card for Maxinet EXT. SENSOR OPTION system. It has 8 inputs, dry contact to view the status of various devices, and 8 outputs 230V 0.
Maxinet – Thermostat Network PS1600 - Maxinet protocol Output card for Maxinet system, with up to 8 outputs – dry contact The PS-1600 is an output card for Maxinet mini COMM B.M.S. system.
Communication / B.M.S. PS2500/4500 Main Controller – BACnet/Modbus Protocol Main Controller for A/C and Fan coil in Building B.M.S Management System (BMS) application, with BACnet or COMPATIBLE Modbus protocol COMM The PS2500/4500 - Family consist of main controllers, with FC BACnet or Modbus Protocol, for A/C and Fan Coil BMS applications. It has a modular, user-friendly design with various A/C or Fan Coil applications built-in, field selectable.
Communication / B.M.S. PS2500/4500 Main Controller – BACnet/Modbus Protocol Configurations Main Panel PS2500 OR OR FMH-X500 OR IRP-X500 ETN-X500 FMT-X500 Control Panels/Accessories Application CTU Fan-Coil controllers Outputs operation FC-SUPER On/Off P-FC-SUPER 0-10VDC proportional for Valve/Fan PM2 3 wire (Open/Common/Close) 24VAC TA2 Thermal Actuator CTU Air Condition controller AC-SUPER 8-2 www.meitavtec.com | info@meitavtec.
Communication BACnet protocol Not in use Fault 2 (indication through protocol) Enable fan only mode Fault 1 (open – all outputs off) Temperature scale Indoor coil sensor Change over sensor Return air sensor Low Medium High Heat (230VAC,1A) Cool (230VAC,1A) Pump Output (230VAC,1A) Communication / B.M.S. PS2500/4500 Main Controller – BACnet/Modbus Protocol Wiring diagrams PS2500-3S-FC-SUPER / PS4500-3S-FC-SUPER PS2500-P-3S-FC-SUPER / PS4500-P-3S-FC-SUPER www.meitavtec.com | info@meitavtec.
Communication / B.M.S. PS2500/4500 Main Controller – BACnet/Modbus Protocol PS2500-PM2-3S-FC-SUPER / PS4500-PM2-3S-FC-SUPER PS2500-TA2-3S-FC-SUPER / PS4500-TA2-3S-FC-SUPER PS2500-AC-SUPER-02-WET / PS4500-AC-SUPER-02-WET 8-4 www.meitavtec.com | info@meitavtec.
Communication / B.M.S. CTU2500/4500 Main Controller – BACnet/Modbus Protocol Main DDC Controller for B.M.S application for A/C or F/C applications with BACNET or MODBUS protocols B.M.S The CTU2500/4500 family are smart, highly versatile COMPATIBLE controllers. Meitavtec has especially developed this product to meet the COMM need for a controller, readily implemented for customer's AC unique HVAC application.
Communication / B.M.S.
0 DI6 DI7 0 N DI8 12V N N T1 0 T2 0 T3 0 Communication BACnet protocol N T3 -Indoor Sensor X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8 T2 – Outdoor sensor Low “N” T1 - Return air sensor DI4 DI5 12Vdc supply voltage – option (30mA max) 0 Occupancy sensor DI2 DI3 Digital input 7 – Indication only 0 Digital input 6 – Heat pump config. DI1 V1 Digital input 5 – Fan speeds L Digital input 4 – Compressor delay Main Supply 230VAC Medium High H.Pump/H.Element 1 (0.5A) Compressor 1 (0.
Communication / B.M.S. CTU2500/4500 Main Controller – BACnet/Modbus Protocol CTU2500-P-3S-FC-SUPER-02 / CTU4500-P-3S-FC-SUPER-02 Fan 230VAC, 3A Main Supply 230VAC N L V1 DI1 0 DI2 DI3 “N” X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8 0 DI4 DI5 Room panel (option) Input Not in use 0 DI6 DI7 0 DI8 N 12V N N N T1 0 T2 0 T3 0 1 2 A B 3 7 8 Digital inputs CTU2500-PM2-3S-FC-SUPER-01 / CTU4500-PM2-3S-FC-SUPER-01 CTU4500-WSHP-WET-01 8-8 www.meitavtec.com | info@meitavtec.
Communication / B.M.S. FMHC220-FC-MDB03 - Modbus RTU Protocol Flush mount, 230VAC thermostat, for Fan Coil B.M.S. applications, with Modbus protocol The FMHC220-FC-MDB03 is a highly versatile, stand alone thermostat, suitable for Building Management System application, with Modbus communication protocol.
Communication / B.M.S. FMHC220-P-FC-MDB01 – Modbus RTU Protocol FC Flush mount, 230VAC thermostat, for Fan Coil B.M.S. applications, with proportional outputs for Cool & Heat, 3 Fan Speeds and Modbus B.M.S interface COMPATIBLE The FMHC220-P-FC-MDB01 is a distinguished, stand COMM alone, proportional thermostat for 2-Pipe or 4-Pipe Fan Coil applications. Its Modbus communication protocol COOL makes it also compatible for Building Management System (B.M.S.) applications.
Communication / B.M.S. ETN-X500 Wall mount, thermostat panel, serving as a user interface of applicable for a communicating B.M.S (Building controller, COMM Management B.M.S Systems) COMPATIBLE The ETN-X500 is a wall mount, thermostat panel, FC functioning as a user interface of a communicating controller. AC Having advanced communication capabilities, it is an ideal panel for B.M.S. applications.
Communication / B.M.S. FMH-X500 Flush mount, thermostat panel, serving as a user interface of Meitav-tec communicating controller, applicable for B.M.S (Building COMM Management B.M.S Systems) COMPATIBLE The FMH-X500 is a flush mount, thermostat panel, functioning as a user interface of a communicating controller. Having advanced communication capabilities, it is an ideal AC panel for BMS applications.
Communication / B.M.S. FMT-X500 Flush mount, thermostat panel, serving as a user interface of a communicating controller, applicable for B.M.S (Building Management Systems) COOL The FMT-X500 is a flush mount, thermostat panel, HEAT functioning as a user interface of a communicating controller. Having advanced communication capabilities, it is an ideal panel for BMS applications.
Communication / B.M.S. IRP-X500 + RT03 Infra Red Panel operating +IR remote Control to operate Meitav-tec's communicating controller, COMM applicable for B.M.S. (Building Management AC Systems) The IRP-X500 is an Infra Red Receiving Panel operating a communicating controller. Having advanced communication capabilities, it is a perfect solution for B.M.S. applications.
Communication / B.M.S. CTU2601 - BACnet Protocol B.M.S Input / Output card for BACnet communication net COMPATIBLE The CTU-2601 is an Input / Output (I/O) card for BACnet communication net, designed to control various devices COMM from software.
Communication / B.M.S. CTU4601 - Modbus RTU Protocol Input / Output card for B.M.S Modbus communication net COMPATIBLE The CTU-4601 is an Input / Output (I/O) card COMM for Modbus communication net, designed to control various devices from B.M.S. software.
Communication / B.M.S. CTU2646 – Input/Output card Input / Output card for BACnet and Modbus B.M.S communication net COMPATIBLE The CTU2646 for is BACnet protocols, an or designed Input/Output Modbus to control (I/O) card COMM communication various devices from the Building Automation Server/Application.
Communication / B.M.S. TCP/IP – Web HVAC Network Controller & viewer The TCP/IP/WEB controller is an ideal B.M.S solution for real-time monitoring and COMPATIBLE control of a thermostat network, via the internet, without the need for COMM designated computer. The TCP/IP/WEB enables access to the HVAC Network Control program via an exclusive IP, and therefore doesn't require a main control computer.
Multi-Zone Systems PSMZ-100/200 for Multi-Zone System 24VAC, Controller for multi-zone system AC controlling 4 to 7 zones The PS-MZ 100/200 is ideal for residential, commercial or COOL industrial applications. It is compatible with Heat/Cool or Heat Pump HVAC applications and can control up to 4 (PS-MZ100) or 7 (PS-MZ200) different zones. One of the zones serves also as the master, and different types of thermostats can be selected as masters or zones.
Multi-Zone Systems PSMZ-100/200 for Multi-Zone System Master & Zone 1 M100 Different types of thermostats can be selected for masters and zones; wall or flush mount, with C° or F° temperature display, programmable or non-programmable. Programmable controllers are ideal for times when zones are unoccupied, and is therefore energy saving and cost efficient.
Multi-Zone Systems PS 2007/P - Multi-Zone Control System 230VAC system Controller with for multi-zone proportional, A/C SYSTEM 3-wire Master M2007/E AC PS-2007/P damper outputs, to control up to 7 zones The PS 2007/P is a simple yet extremely intelligent controller for Multi-Zone system, ByPass Damper ideal for small to medium scale apartments HEAT Upto 7 Zone Dampers and houses.
Multi-Zone Systems PS 2007 - Multi-Zone Control System M2007 Master Controller Wall mount, Master Controller for Multi-zone systems (up to 7 zones) The M2007-E Master Controller is the main controller for the main system functions.
Multi-Zone Systems PS-MZ502 Multi-Zone System 24VAC, Multi-Zone and climate control system, to AC control up to 31 zones The PS-MZ502 is an advanced multi-zone system controlling up to 31 Zones. It is the perfect climate control system for small to medium residential, commercial or industrial applications, enabling users to decide which rooms in their house or office will be air conditioned or HEAT closed.
Multi-Zone Systems PS-MZ502 Multi-Zone System Master M500 Controller Zone Z500 Controller The Master M500 of PS-MZ502 Multi Zone system The Zone Z500 controls the following functions: controls main system and zone functions : y Set local On/Off status Main system functions y Set local set point y On/Off y Modes: Cool, Heat, Auto-change-over, Fan Only y Fan: Fan On – Auto Fan y Activate or de-activate Economy Mode (Unoccupied Mode) y View main system parameters- damper status, faults, pressure, T2,
Damper Control Solutions ETN-24-AZC DAMPER CONTROL 24VAC damper controller, proportional, with an option for a duct temperature sensor COOL The ETN-24-AZC is the best stand-alone damper controller HEAT with a proportional output. This thermostat can control all standard, general purpose dampers- (3-wire, 24VAC) and its AUTO CHANGE-OVER Open / Close time is adjustable by the user.
Damper Control Solutions FMT-24-AZC-Proportional-IR Flush mount, 24VAC thermostat for Damper control, with a proportional 3-wire output The FMT-24-AZC is an ideal stand-alone damper COOL controller with a proportional floating output. This thermostat can control all standard, general purpose HEAT dampers- (3-wire, 24VAC), and its Open / Close time is adjustable by the user.
Damper Control Solutions ETN-40P1 Wall mount, room thermostat, with IR-option for DAMPER CONTROL damper control, On/Off to Damper The ETN-40P1 is a wall mount, thermostat panel, COOL functioning as a user interface for damper control. HEAT The ETN-40P1 is a smart looking thermostat with a soft °C aesthetic shape and a large, easy to read LCD display * On /Off - 12V signal to damper EXT.
Damper Control Solutions FMH-40P1 Flush mount, room thermostat, with IRoption for damper control, On/Off to Damper The FMH-40P1 is a flush mount, thermostat panel, COOL functioning as a user interface for damper control.
Dampers DA-401 - Stand Alone Dampers VAV Stand-alone dampers for air flow capacity regulation and control. Available in 6",8" & 10" diameter The Stand Alone proportional dampers are the best way to obtain optimum results from today's air conditioning ducting systems. They allow you to have complete control over which rooms at home are air-conditioned or closed, and are thus energy saving.
Dampers DA-24-3W Stand alone damper – Air flow regulator & control 3-WIRE OUTPUT Available in 6”, 8”, 10” diameter Damper for climate control are the best way to regulate airflow in a multi-zoned house, hotel or office building to improve efficiency and occupant COOL comfort. HEAT Dampers allow you to have complete control over which rooms are air conditioned or closed, and are thus energy saving. Users decide on mode and set point and the damper will open or close accordingly.
Floor Heating FE-340-H1 Wall mount, 230VAC thermostat for Floor Heating HEAT The FE-340-H1 thermostat for floor heating elements perfectly suits commercial and residential applications. ECONOMY The FE-340-H1 thermostat has been specifically designed for Floor Heating systems and has an output for Heat only (16Amp). The FE-340-H1 is attractively designed, easy to use and is energy saving solution for Floor Heating applications.
Floor Heating FE-340-H1-PAR Wall mount, 230VAC thermostat, for Floor HEAT Heating applications, with Overheat protection (27°C) ECONOMY The FE-340-H1-PAR thermostat for floor heating is perfectly suitable for higher-end commercial or residential applications. The FE-340-H1-PAR-45 thermostat, with an output for Heat only (16Amp), has been specifically designed for Floor Heating, parquet systems, TIMER where temperature mustn't exceed 27°C (Adjustable).
Floor Heating FE-340-H1-PAR-45 Wall mount, 230VAC thermostat, for Floor Heating HEAT applications, with Overheat protection The FE-340-H1-PAR-45 thermostat for Floor Heating is ECONOMY perfectly suitable for higher-end commercial or residential applications. The FE-340-H1-PAR-45 thermostat has an output for Heat only (16Amp) and has been specifically designed for Floor Heating, parquet systems, where temperature cannot be allowed to exceed 45°C.
Floor Heating FHV-H1-PR-IR Wall mount, 230VAC thermostat, for HEAT Floor Heating applications, with weekly programming ECONOMY The FHV-H1-PR-IR thermostat for floor heating is perfectly residential suitable for applications commercial and has or been specifically designed for Floor Heating systems. With weekly programming and external sensor option, the FHV-H1-PR-IR is a simple, yet PROG efficient solution for floor heating systems.
Floor Heating PS8-FH + ETN-8H Multi Zone Controller (PS8-FH) + Wall-mount HEAT Thermostat (ETN-8H) for Floor Heating applications EXT. SENSOR OPTION The PS8-FH + ETN-8H multi-zone controller for Floor Heating elements perfectly suits commercial or residential °C applications. This multi-zone system consists of one main board to control up to 8 zones and a thermostat. Each zone works with two temperature sensors; ambient temperature sensor and floor temperature sensor for floor overheat protection.
Air Quality GAQ - Air Quality Controller & Sensor Series Air Quality controller – wall mount, 24VAC, or 12VDC 0-10V and OUTPUT Duct / Room sensor 24VAC or 12VDC GAQ -12/24 The GAQ series are Air Quality Sensors and Controllers that automatically react to air pollution sources. They sense tobacco smoke, toilet odors, strong kitchen smells, etc. and mechanically regulate ventilated areas such as cinemas, GAQ Room Sensor pubs, restaurants, toilets or conference rooms.
Air Quality CO Detector Sensor for measuring carbon monoxide (CO) concentration SensiCO PX 300 is a reliable sensor for measuring carbon monoxide (CO) concentration in locations, such as car parks and garages. As CO, a dangerous poisonous gas, has no smell, taste or color, it is important to install SensiCO PX300, as a total protection from CO poisoning. When CO concentration exceeds 50 PPM, a signal to the ventilation system is activated and an alarm is sent to the car park management/ control.
HVAC Analyzers M4000MD HVAC Analyzer, measures inlet and outlet variables, for an intelligent analysis of HVAC performance HUMIDITY The M4000MD HVAC Analyzer is a diagnostic instrument for a wide range of applications. It consists of two units; a large LCD display and a hand held sensor connected by a coiled command cable. The M4000MD measures all HVAC inlet and outlet variables, allowing for an intelligent analysis of system performance.
Special Controllers EC-300 230VAC, Energy Controller for energy saving in offices AC or hotel rooms. Turns off/on HVAC + lighting systems per presence in a room via an Occupancy Sensor and optional Contact Inputs The EC-300 is a smart Energy Controller, which offers substantial energy saving of Air Conditioning & Lighting operation in hotel bedrooms, offices or conference rooms.
Special Controllers TLC 230VAC, Temperature Limit Controller for energy saving. Turns off/on compressor as per adjustable temperature limits. The TLC is a simple, yet efficient Temperature Limit ECONOMY Controller which offers substantial energy saving of Air Conditioning by limiting ‘Set Temperature’.
Special Controllers Lead-Lag Controller Lead-Lag Controller for 2 complete units, with AC On/Off cycling every 24 hrs. The Lead-Lag controller is the most efficient way of COOL controlling temperature in a remote location where both a primary cooling unit and a back-up cooling unit are used. EXT. SENSOR OPTION The Lead-Lag controller controls 2 different units, treating them as 2 different stages, and allows them to cycle On and Off every 24hrs.
Special Controllers M6000-T1-T2-AN 230VAC, Multi Stage Controller, with 6 programmed outputs + analog inputs, for large applications The M6000-T1-T2-AN controller is the best multi-stage COOL display controller on the market today. As opposed to many complicated units, the M6000-T1-T2-AN makes it incredibly HEAT easy to pre-set stages and all other parameters. This, plus the 6 individually programmed outputs, gives users a unique ability to “custom-build” their entire HVAC control system.
Special Controllers FCC_01 - Free Cooling Controller Wall mount, 230VAC controller, for Cooling AC with outside fresh air – saves energy and refreshes room air. FC Meitav-tec's 'Free Cooling' controller offers a simple, energy saving solution to control room temperature. COOL 'Free Cooling' is virtually a Cool Only thermostat, which serves as a complementary to an existing DAMPER CONTROL HVAC control system. The thermostat is designed to EXT.
Sensors and Accessories DT-02 Duct Sensor Duct sensor in a plastic enclosure Suitable for all Meitav-tec's thermostats Features y Dimensions: y Range - -40°C to 110°C ; 39°F to 230°F * width - 45 mm * height – 38 mm * depth – 20 mm y Thermistor type - NTC * rod length – 155 mm y Standard – UL94V-0 y Measurement accuracy - ±3% y Weight: 14 gr. y Color – white y Resistance – 25C; 77F = 50 K y Plastic - ABS y Thermal Time Rate – 15 seconds Wiring Diagram www.meitavtec.
Sensors and Accessories GHU Room/Duct Sensor General purpose stand-alone humidity and 0-10V temperature sensor for room or duct. OUTPUT GHU Room Sensor The GHU Room or Duct sensors are general purpose, all-in-one™ sensors for both temperature and humidity. HUMIDITY Humidity measurement is given as a proportional output, 0-10VDC while temperature reading may be given in one of two ways: 1.
Sensors and Accessories TS-01 & TS-02 Temperature Sensors TS-01 External Temperature Sensor, 80 cm cable TS-02 External Temperature Sensor, 180 cm cable Features y Cable 2 wire – AWG 24 BLACK y Thermal Time Rate – 15 seconds y Thermistor color – silver or brass y Range - -40°C to 110°C ; 39°F to 230°F y Dims of Thermistor 1" x 0.25" (2.5 cm x 0.
Sensors and Accessories RS-01 Temperature Sensor External Temperature Sensor in a decorative box External temperature sensor in a wall mount, decorative box. Suitable for all Meitav-tec's thermostats Features y Cable 2 wire – AWG 24 BLACK y Thermal Time Rate – 15 seconds y Dimensions – 1.8" x 1.
Sensors and Accessories RT03 Remote Control Hand held remote control unit, for Meitav-tec's thermostats and controllers. HEAT An infra-red remote controller, suitable for Meitav-tec's thermostats and receivers. Easy-to-use, with big LCD and a large temperature digit display.
Sensors and Accessories RT05 Remote Control COOL Hand-held remote control for programmable thermostats, with European weekly program An infra-red, remote controller, suitable for programmable thermostats. Easy-to-use, with big LCD and a large temperature digit display, °C display.
Power Supplies PS-102 230VAC – 12VDC, Power Supply The PS-102 is a power supply for HVAC system. It converts 230VAC to 12VDC for thermostat operation and through relays, transfers commands from thermostat to operate 230VAC HVAC system. It offers 7 relay outputs to control HVAC system and 3 inputs for Temperature Sensors.
Power Supplies PS-104 230VAC – 12VDC, Power Supply The PS-104 is a power supply for HVAC system. It converts 230VAC to 12VDC for thermostat operation and through relays, transfers commands from thermostat to operate HVAC system. It offers 8 relay outputs to control HVAC system and 3 inputs for Temperature Sensors.
CTU Communication Controller 230VAC, 115VAC, 24VAC Specifications Temperature Range Accuracy +1˚ Weight 0.545 Kg Plastic PC/ABS Color gray Flammability UL94V-0 204 .5 m m 92 mm www.meitavtec.com | info@meitavtec.
ERT Wall mount thermostat 230VAC Specifications Temperature Range 10°C ÷ 30°C , 50°F ÷ 86°F Accuracy ±1°C Weight 0.25 Kg Plastic PC/ABS Scale °C / °F Flammability UL94V-0 Color white Temperature Input 50K@25°C 83mm 45mm B-2 www.meitavtec.com | info@meitavtec.
ETN (non programmable) Wall mount thermostat/panel 24VAC, 12VDC Colors white silver black gold others Accessories TS01 RS01 RS02 WP4 RS03 Specifications Temperature Range 10°C ÷ 30°C, 50°F ÷ 86°F Accuracy ±1°C Weight 0.25 Kg Plastic PC/ABS Scale °C / °F Flammability UL94V-0 Color white, silver, black, others Temperature Input 50K@25°C 80mm Front view Side view 92mm 22mm 80mm www.meitavtec.com | info@meitavtec.
ETN (programmable) Wall mount thermostat/panel 24VAC Colors white silver gold black others Accessories TS01 RS01 RS02 Specifications Temperature Range 5°C ÷ 35°C Accuracy ±1°C Weight 0.125 Kg Plastic PC/ABS Scale °C / °F Flammability UL94V-0 Color white, silver, black, others Temperature Input 50K@25°C 80mm B-4 www.meitavtec.com | info@meitavtec.
FMH Flush Mount thermostat/panel 24VAC, 220VAC, 110VAC Colors white silver gold black others Accessories TS01 RS01 RS02 DT02 RT03 Specifications Temperature Range 10°C ÷ 30°C , 50°F ÷ 86°F Accuracy ±1°C Weight 0.200 Kg Plastic PC/ABS Scale °C / °F Flammability UL94V-0 Color white, silver, black, others Temperature Input 50K@25°C Front view Side view Back view 6mm (max) 118mm 75mm C O 80mm ON Cool Hi Heat Med Lo ON OFF MODE 53mm FAN 35mm (inside the wall) www.meitavtec.
FMT(non programmable) Flush mount vertical thermostat/panel 24VAC , 220VAC, 110VAC Accessories TS01 RS01 RS02 Specifications Temperature Range 10°C ÷ 30°C, 50°F ÷ 86°F Accuracy ±1°C /±1.5°F Weight 0.200 Kg Plastic PC/ABS Scale °C / °F Flammability UL94V-0 Color white Temperature Input 50K@25°C / 77°F Front view 80mm Side view Back view 6mm (max) 53mm 118mm 75mm ON SELECT 35mm (inside the wall) B-6 www.meitavtec.com | info@meitavtec.
MIGA Main Controller ALL-IN-ONE™ 230VAC Accessories ETN-Miga FMH-Miga TS01 MP101 M1P RT03 Specifications Temperature Range 10°C ÷ 30°C Accuracy ±1°C Weight 0.400 Kg Plastic PC/ABS Scale °C / °F Flammability UL94V-0 www.meitavtec.com | info@meitavtec.
PS (Communication Controller) Main Controller 230VAC, 115VAC, 24VAC Accessories FMH-X500 IRP-X500 FMT-X500 ETN-X500 RS01 RS02 Specifications B-8 Temperature Range 10°C ÷ 30°C Accuracy ±1°C Weight 0.340 Kg Plastic PC/ABS Scale °C / °F Flammability UL94V-0 www.meitavtec.com | info@meitavtec.
TED (without display) Wall mount, mechanical thermostat 220VAC, 24VAC Accessories TS01 RS01 RS02 WP1 Specifications Temperature Range 10°C ÷ 30°C Accuracy ±1°C Weight 0.150 Kg Plastic PC/ABS Scale °C Flammability UL94V-0 Color white Temperature Input Thermistor 50K@25°C 125mm 106mm 10mm www.meitavtec.com | info@meitavtec.
TED (with display) Wall mount, mechanical thermostat 220VAC, 24VAC Accessories TS01 RS01 RS02 WP1 Specifications B-10 Temperature Range 10°C ÷ 30°C Accuracy ±1°C Weight 0.150 Kg Plastic PC/ABS Scale °C Flammability UL94V-0 Color white Temperature Input Thermistor 50K@25°C www.meitavtec.com | info@meitavtec.
