Table of Contents Table of Contents 1 On-Off Thermostats ……...……………………………..……………………….............………… 6-12 2 On-Off Thermostats – Programmable …………....……………..…………………….……….. 13-17 3 Proportional Thermostats ………………….……………………………………………………… 18-20 4 Dampers Controls …...………………………….………………………………………………….. 21 5 Humidity Controllers ……………………………….……………………..……………………….. 22-23 6 Building Automation ……………………………….………………………………….……..…… 24-31 7 Maxinet – Thermostat Network ………………...…………………...
Naming Rules Meitav-tec Naming Rules: (Model NUMEROCLOSUREING) Product name is usually an abbreviation of product model, followed by various possible features, such as operating voltage, number of Cooling/Heating stages, fan speed, or remote control.
Thermostats types Thermostats are typically divided to: 1. Flush Mount FMT Flush Mount, Vertical type FMH Flush Mount, Horizontal type 2. Wall Mount ETN CTR/CEM/CEO TED www.meitavtec.com | info@meitavtec.
On/Off Thermostats ETN24 Series Wall-mount, 24VAC thermostats, for A/C and Fan-Coil applications The ETN24 series includes fully featured, stylish thermostats with a large, easy to read display, suitable for light commercial and residential applications. The ETN24 thermostats range offer control for a large variety of HVAC systems with different configurations, including Cool Only (C), Heat/Cool (HC) or Heat Pump (HP) with 1 or 3 fan speeds.
On/Off Thermostats Comparison Table # of Compressor stages ETN24-SUPER-SH ETN24-SUPER-SI ETN24-SUPER-SF Up to 3 Up to 2 Up to 2 ● ● Up to 2 Up to 3 Up to 3 1 or 3 1 1 ● ● ● ○ ○ Support Heat Pump configuration (Reversing Valve) # Electrical Heat elements Fan Speeds Ambient Temperature reading offset IR Remote Control Dry Contact input ● ● ● Oil/Gas operation in Heat Mode ● ● ● ● ● Emergency Heat in HP Mode Temperature Set-Point Limits ● ● ● Ambient Temperature display ●
On/Off Thermostats FMT24 Series Flush-mount, 24VAC thermostats, for A/C and Fan-Coil applications The FMT24 series includes fully featured reliable, flush-mount thermostats with a large, easy to read display, suitable for light commercial and residential applications.
On/Off Thermostats Comparison Table FMT24-SUPER (1S) FMT24-SUPER-2S-FP Up to 2 1 ● ● Up to 2 Up to 2 Fan Speeds 1 2 Ambient Temperature reading offset ● ● ºF/ºC ºF Oil/Gas operation in Heat Mode ● ● Emergency Heat in HP mode ● ● Temperature Set-Point limits ● ● Economy Mode ● ● External Temperature Sensor ○ ○ # of Compressor stages Support Heat pump configuration # of Electrical Heat elements Temperature Scale Freeze Protection – adjustable temperatures ● Auto Fan (fan on
On/Off Thermostats TED24 Series Wall-mount, 24VAC thermostats, for A/C and Fan-Coil applications The TED24 Series offer simple, reliable and cost effective solution that suits commercial or residential applications to control a large variety of HVAC systems, including Fan-Coils. This thermostat series is one of Meitav-tec best sellers over the years, for proven field reliability.
On/Off Thermostats Comparison Table TED24-SUPER/TED24-SUPER-01 TED24-AUTO-SUPER Up to 2 1 ● ● Up to 2 Up to 2 Fan Speeds 1 1 Oil/Gas operation in Heat Mode ● ● Ambient Temperature display ● ● External Temperature Sensor ○ ○ Auto Fan (fan on demand) – optional ● ● Compressor Protection Delay timer ● ● ºF/ºC ºF/ºC # of Compressor stages Support Heat pump configuration # Electrical Heat elements Temperature Scale ● – standard ○ – option Wiring Diagram TED24-SUPER/TED24-SUPER-01
On/Off Thermostats FMH-FC-SUPER3 Series Flush-Mount, 24VAC, 110VAC or 220VAC for most Fan-Coil applications The FMH-FC-SUPER3 series allows users the flexibility of having one main controller for most Fan-Coil applications. It can be flush-mounted or installed directly into the Fan-Coil, with an External temperature sensor for the return air.
On/Off Thermostats ‐ Programmable PROG Series Flush-mount or Wall-mount, 24VAC Programmable Thermostats The PROG series includes FMT and ETN models, with Simple to The different programs, offering several periods (according to model) per day, are easy to use and provide 24-hour comfort as well as energy savings. These thermostats control a large variety of HVAC systems with or Heat Pump (HP) and various Fan Speeds.
On/Off Thermostats ‐ Programmable Comparison Table 1Program Type Events per Day Start time, Set Cool Set Heat Event Settings Clock type ETN24-SUPERPROG-7DAYSUS 7-Days Prog. 5-1-1 7 Days 4 1 Start time, Set Cool Set Heat Start time, Stop time 1 Set point Start time Stop time 24 Hrs.
On/Off Thermostats ‐ Programmable Wiring Diagrams FMT-24-SUPER-FP-PROG-US FMT-24-SUPER-2S-FP-PROG-US FMT-24-SUPER-3S-FP-PROG-US ETN24-SUPER-FP-PROG-US/EU ETN24-SUPER-2S-FP-PROG-US/EU ETN24-SUPER-3S-FP-PROG-US/EU Y1 Compressor (0.5A) Y1 Compressor 1 (0.5A) G1 Fan low (0.5A) G1 Fan low (0.5A) G3 Fan high (0.5A) G3 Fan high (0.5A) T T G2 W1 B/O C RH RC External sensor (option) T T External sensor (option) Heat element 2 (0.5A) G2 Fan medium (0.5A) Heat element 1 / Heat pump (0.
On/Off Thermostats ‐ Programmable CTR-24-SUPER Wall mount, 24VAC thermostat, Weekly Programmable, with an extra IR remote control connection for a second location The CTR-24-SUPER thermostat offers a selectable number of heating and cooling stages for Heat Pump or Heat/Cool systems. The CTR-24-SUPER enables connection of an extra IR receiver panel for remote control from a second location. In addition, it offers an alarm output, a fault input and also indicates outdoor temperature.
On/Off Thermostats – Programmable Voice & Phone CEO/CEM-24-HC22 “Talking Thermostat” With telephone & voice capabilities, “call-out” options and 5-1-1 weekly programmable, these thermostats are perfect for your second home, cabin or office.
Proportional Thermostats Thermostats - Proportional Outputs Wall-mount, 24VAC thermostats, for all Fan-Coil Proportional Valve applications. The proportional series thermostats are designed to control a wide variety of Fan-Coil applications, with Proportional Valves configurations. Proportional thermostats suggest different proportional outputs such as 0-10VDC or 2-10VDC, 3 wire (Open-Common-Close), Various Fan Speed control combined with additional Energy Saving Algorithms and Logic.
Proportional Thermostats Comparison Table ETN-24-P/PDFC-SUPER2 ETN24-PH-FCSUPER ETN24-PM2-3S ETN24-PMH ETN24-PMHP Cool output type Proportional (0-10V) Proportional (0-10V) 3 wire (Open/Com/Close) 3 wire (Open/Com/Close) Compressor w/wo heat pump Heat output type Proportional (0-10V) On/Off 3 wire (Open/Com/Close) On/Off 1st stage 3 wire (Open/Com/Close) 2nd stage Compressor w/wo heat pump 1, 2 or 3 3 3 1 or 3 1 or 2 Fan Speeds Oil/Gas operation in Heat Mode Change over Temp.
Proportional Thermostats Wiring Diagrams ETN-24-P/PD-FC-SUPER2 0 W 0 Y T T0 ETN24-PH-FC-SUPER Proportional output for Heat (0-10V) (P Configuration) Proportional output for Cool (0-10V) (P configuration) Proportional output for Cool & Heat (0-10V) (PD cofiguration) External sensor (option) ETN24-PM2-3S OP1 Open CL1 Close COM Common OP2 Open CL2 Close C R T2 0 Auto change over sensor (option) (PD configuration) G1 Low G2 Medium G3 High C R Fan (0.
Dampers Controls ETN-24-AZC Wall-mount, 24VAC damper controller, proportional with an optional duct Temperature Sensor The ETN-24-AZC is a simple to use, stand-alone damper controller with a proportional output. The ETN-24-AZC can control all standard, general purpose dampers - (3-wire, 24VAC) and the Open/Close time is adjustable by the user.
Humidity Controllers CHU-24-SUPER Wall-mount, 24VAC Programmable thermostat, controlling Temperature & Humidity The CHU-24-SUPER thermostat is a combined Temperature & Humidity controller. It offers a selectable number of Heating and Cooling stages as well as an output for Humidifier or de-Humidifier. The CHU-24SUPER has a built-in humidity sensor.
Humidity Controllers M5001-24 Wall mount, 24VAC controller for Temperature & Humidity, with 4 Proportional outputs (0-10VDC) The M5001-24 offers unique flexibility and simplicity, allowing users proportional control of both temperature and humidity. The M5001-24-4X0-10VDC offers 4 different proportional outputs; Cool, Heat, Humidifier and De-humidifier.
Building Automation CTU – Main Controller – Building Automation Main Controller for B.M.S The CTU is a smart, highly versatile controller; Meitav-tec has especially developed this product to meet the need for a controller, readily implemented for customer's unique HVAC application. The CTU is a "Plug & Play" communicating controller – Does not require Technician Configuration when installed.
Building Automation Wall Panels Configurations CTU Controller OR OR FMT-X500 FMH-X500 OR ETN-X500 IRP-X500 Control Panels/Accessories Applications CTU Fan-Coil controllers Outputs operation FC-SUPER On/Off P-FC-SUPER 0-10VDC proportional for Valve/Fan PM2-FC-SUPER 3 wire (Open/Common/Close) 24VAC TA2-FC-SUPER Thermal Actuator (230VAC) CTU Air Condition controller AC-SUPER Compressor & Heat Pump outputs WSHP (Water Source Heat Pump) Compressor & Heat Pump www.meitavtec.
Building Automation CTU - General Wiring Diagram N L DI1 0 DI2 DI3 Digital input 3 0 Digital input 4 DI4 DI5 Digital input 5 0 Digital input 6 DI6 DI7 Digital input 7 0 Digital input 8 DI8 12VDC Output Main Supply 24VAC / 110VAC / 230VAC Digital input 1 Digital input 2 T1 0 T2 Temperature input 2 0 T3 Temperature input 3 0 AI1 Analog input 1 0 Analog input 2 AI2 5VDC Output (option) A Communication B RS-485 Temperature input 1 MAC Address Configuration End of line Protection Fuse 8A V1 X1 DO1 DO2 D
Building Automation CTUx601 - Input/Output Card Input/Output card for BACnet or Modbus communication net The CTU-x601 is an Input/Output (I/O) card for BACnet, Modbus or Maxinet communication network, designed to control various devices from the Building Automation Server/Application. General Features y Main supply: 24VAC, 110VAC or 230VAC y 8 x Digital Outputs – Available in either 24VAC, 110VAC or 230VAC y RS-485 Communication port – Available in BACnet, Modbus and proprietary Maxinet protocols.
Building Automation CTU2646 - Input/Output Card Input/Output card for BACnet or Modbus communication net The CTU2646 is an Input/Output (I/O) card for BACnet or Modbus communication protocols, designed to control various devices from the Building Automation Server/Application.
Building Automation VAV Controller - Modbus & BACnet Main controller, 24VAC for VAV applications with Modbus or BACnet BMS interface The VAV controller is designed to work with VAV (Variable Air Volume) dependent pressure units. The VAV controller consists of Master and Slave units (up to 3 Slaves per Master unit) and can operate as part of a B.M.S control network or as standalone units.
Building Automation CTU – Air Handling Unit Controller AHU Controller Meitav-tec CTU AHU Controller has been designed and configured to control Air Handling Unit (AHU) as per customer's specifications. The CTU AHU is a "Plug & Play" controller, suitable for small/medium AHU without the need to modify/program the software for each application. This high performance, reliable controller is locally operated by a panel display and communicates with the B.M.S by Modbus protocol.
Building Automation TCP/IP - Web HVAC Network Controller & Viewer The TCP/IP/WEB controller is an ideal solution for real-time monitoring and control of a thermostat network, via the internet, without the need for designated computer. The TCP/IP/WEB enables web access to the HVAC Network Control program via an exclusive IP, and therefore doesn’t require a main control computer.
Maxinet – Thermostat Network Maxinet – Mini B.M.S. Control software Maxinet is a Web based, mini B.M.S. software, for controlling small to medium size HVAC networks Maxinet allows remote access to the HVAC system from anywhere in the world. Administrators/Maintenance controllers can very easily view and manage the HVAC endunits from a remote location. With a simple click of the mouse, they can change operating mode, enter new temperature set points or turn on/off specific units/zones.
Maxinet – Thermostat Network Schematic Layout MCU Master Control Unit for stand alone applications or Maxinet Router for up to 60 thermostats The MCU is a Master Control Unit for stand-alone applications to control up to 60 thermostats. It is also applicable as a router for large network applications in Maxinet B.M.S. or just for simple divisions in installations such as floors or large buildings.
Maxinet – Thermostat Network ETNC-24-SUPER- Maxinet protocol Wall mount, 24VAC thermostat Having most A/C applications built-in, field selectable and offering several stages of Cool and Heat, the ETN-C-24-Super is suitable for either Heat/Cool or Heat Pump systems. It offers built in Maxinet protocol, for a cost-effective networking solution in small to medium size BMS.
Special Controllers TLC-24 24VAC, Temperature Limit Controller for energy saving. The TLC will Turns the compressor On/Off as per adjustable temperature limits. The TLC is a simple, yet efficient Temperature Limit Controller which offers substantial energy saving of Air Conditioning by limiting ‘Set Temperature’.
Special Controllers EC324 24VAC, energy saving controller, for offices or hotel rooms. Turns On/Off HVAC and lighting systems per presence in a room via an Occupancy Sensor and optional Contact Inputs The EC-324 offers substantial energy saving of Air Conditioning & Lighting operation in hotel rooms, offices or conference rooms.
Air Quality GAQ - Air Quality Controller & Sensors 24VAC wall mount, Air Quality controller with 24VAC Duct/Room sensors The GAQ series are Air Quality Sensors and Controllers that automatically react to air pollution sources (PPM). They sense tobacco smoke, toilet odors, strong kitchen smells, etc, and mechanically regulate ventilated areas such as cinemas, pubs, restaurants, toilets or conference rooms. The sensor switches the fan on when air quality drops below a preset, adjustable level.
Air Quality SensiCO PX300 – CO Sensor Sensor for measuring carbon monoxide (CO) concentration SensiCO PX 300 is a reliable sensor for measuring Carbon Monoxide (CO) concentration in enclosed locations, such as parking garages. When CO concentration exceeds 50 PPM, a signal to the ventilation system is activated and an alarm is sent to the car park management/ control. SensiCO PX 300 may be connected to a self-control system or to the B.M.S.
Sensors and Accessories Remote Control Units Hand held remote control unit Easy-to-use infra-red remote control unit, suitable for Meitav-tec thermostats and receivers, with big LCD and a large temperature digit display.
Notes Notes 40 www.meitavtec.com | info@meitavtec.
Notes Notes www.meitavtec.com | info@meitavtec.
Notes Notes 42 www.meitavtec.com | info@meitavtec.
