User manual

www.scillc.com |[e-mail] | We make life more comfortable
53
2
2
Programming
If you want to operate the thermostat manually - without the
program, you can easily disable programming.
Disable/Re-enable programming
1
1
To disable the program, press and hold (5 seconds) the Prog button.
The word Program will disappear from the display
To re-enable the program, press and hold the Prog button again
Program
If the thermostat was setup to
be Non-Programmable by the
installing technician, contact
the installer, or refer to the
Technician Settings document
for enabling the Program by
the internal DIP switch