User's Manual

3.3 Works with HyperSecureLink software or Mobile App. from Internet.
Note: LS-10 must be set as a Server, please refer to Appendix C.1.
Note: 1, To be accessed from the Internet, the Router needs a fixed IP address or a domain
name. A dynamic domain name can be got from www.dyndns.org, www.no-ip.com
(free) or other dynamic domain name service provider, some router manufacturers
provide free domain name service if you use their router such as DLINK. Please refer
to the web site: http://support.dlink.com/Emulators/dcs3415/setup_dns.html for
more information.
2, The LS-10 has to be mapped to a TCP port that can be accessed from Internet by
virtual server or port forwarding function in the router.
(Ex: Using the free Domain Name Service from the router manufacturer DLINK and
192.168.2.100 is mapped as Virtual Server Port 1234 in the router.)