User's Manual

5. OPERATION MODE
5.1 AWAY Mode: When you leave your home or business, set the system into Away Mode.
Away Mode Arming Sequence
Disarm Exit Delay AWAY mode active →
System status:
↑ (0-255 seconds)
Set AWAY mode
Note: When you set the LS-10 in AWAY Mode, the Base Unit clears any previous alarm and
warning status on the LED and check the state of the Door Magnet sensors. If any of the
sensors is still open (for example, you forgot to close the back door before you leave), the
Base Unit will issue a 5 sec. long beep and insert 20 seconds Exit Delay automatically if
no Exit Delay has been set to remind you to check the house again.
Enter into “AWAY” Mode from different devices or services.