User's Manual

(5) CMS Mode Set CMS1
Set Mode Change Report Report On
Set CMS2
Report Off
Auto Link Check Auto Link Check On Check Interval
Auto Link Check Off
Loopback Test Start Test
Set 2 Way Audio 2 Way Audio ON/OFF
Set DTMF Data Time? DTMF Data=50ms /100ms
Set Telephone Number Telephone Number
Account Number
Set Password
Mode Change Report: ON /OFF (default OFF)
Mode Change Report On: The LS-30 will report to the CMS if the operation mode
(Away/Home/Disarm) has been changed.
Mode Change Report Off: The LS-30 will report to the CMS with only alarm and
warning events but no operation mode report.
Auto Link Check: ON/OFF (default OFF)
Auto Link Check On: The LS-30 will send a check signal to the CMS periodically
according to the Interval setting.
Auto Link Check Off: Disable the Auto Link Check function with the CMS.
Loopback Test: The LS-30 will send a check signal to the CMS immediately.
2 Way Audio: ON/OFF (default OFF)
2 Way Audio ON: The Base Unit will enter into 2-way voice communication mode after
sending the alarm report to the CMS.
(This function only works for a CMS with Contact ID protocol and has voice
communication capability.)
DTMF Data Time: 50ms/100ms (default 50ms)
Select the DTMF data pulse time as 50ms or 100ms for the Contact ID protocol.
(Please consult with your CMS provider if you want to change this parameter.)
CMS Telephone number and account number:
The CMS telephone number (16 digits Max.) and the user account number (8 digits Max.)
that are used to link to the CMS station.
34