RadioShack 8-in-1 LCD ENG.fm Page 1 Friday, February 9, 2007 6:11 PM 8-in-1 LCD Remote 15-100 Please read this user’s guide before installing, setting up and using your new product www.radioshack.
RadioShack 8-in-1 LCD ENG.fm Page 2 Friday, February 9, 2007 6:11 PM TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Battery Use And Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 To Install Batteries: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features and Functions . . . . . . . . . . .
RadioShack 8-in-1 LCD ENG.fm Page 3 Friday, February 9, 2007 6:11 PM Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Setup Codes for Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 41 Setup Codes for Audio Accessories . . . . . . . . . . . . . . . . . . . . 42 Setup Codes for Audio Receivers. . . . . . . . . . . . . . . . . . . . . .
RadioShack 8-in-1 LCD ENG.fm Page 4 Friday, February 9, 2007 6:11 PM INTRODUCTION Thank you for purchasing a RadioShack 8-in-1 LCD Remote. Your remote lets you control up to eight home entertainment devices with one easy-to-use, compact unit. After installing batteries (see next section), you can immediately use the RadioShack 8-in-1 LCD Remote to control Sony home entertainment devices, and a Dish Network satellite receiver. To control other brands, perform the instructions in Programming a Device.
RadioShack 8-in-1 LCD ENG.fm Page 5 Friday, February 9, 2007 6:11 PM INSTALLING BATTERIES Your RadioShack 8-in-1 LCD Remote requires four AAA batteries (not supplied) for power. Battery Use And Safety • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (that is, standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
RadioShack 8-in-1 LCD ENG.fm Page 6 Friday, February 9, 2007 6:11 PM FEATURES AND FUNCTIONS Use the illustration below to locate features on the RadioShack 8-in-1 LCD Remote and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see “Device Table” on page 9.
RadioShack 8-in-1 LCD ENG.fm Page 7 Friday, February 9, 2007 6:11 PM Key Charts Press this key… To… Enter programming mode. Turn the selected device on or off, or run the macro you programmed for the Power button (see “Setting the Power Macro” on page 20 for more information). Select a device to control. Display the menu for the selected device. Display the menu for the PVR. Display the program guide for the selected device. Move the cursor in the program guide and menu screens.
RadioShack 8-in-1 LCD ENG.fm Page 8 Friday, February 9, 2007 6:11 PM Press this key… To… Exit the selected device's menu, guide, or program. Select the next or previous channel. Select the next or previous chapter on some DVD player models. Increase or decrease the sound level. NOTE: When the device that is set up does not support volume functions, the remote will send volume for TV. Turn the sound off or on.
RadioShack 8-in-1 LCD ENG.fm Page 9 Friday, February 9, 2007 6:11 PM Press this key… To… Control your VCR, DVD player, or Video On Demand (VOD) if available on your cable/satellite service. Control the functions of your PVR. Control the Picture in Picture (PIP) functions of your TV or VCR. Record a video program on a recordcapable device (press twice). Use the light bulb key to turn LED backlighting on or off. Press and hold this key to display the time and date on the LCD.
RadioShack 8-in-1 LCD ENG.fm Page 10 Friday, February 9, 2007 6:11 PM SETTING THE LANGUAGE Before using your RadioShack 8-in-1 LCD Remote, you must set the default language (either English or Spanish). You cannot use your remote control until you have set the language. To set the language for your remote control for the first time, perform the following steps: 1. After the remote powers up, the LCD displays English OK or . 2. Press OK for English or press until Spanish is displayed. Press OK. 3.
RadioShack 8-in-1 LCD ENG.fm Page 11 Friday, February 9, 2007 6:11 PM Use the or keys to select either A or P. Press OK once. The LCD displays Success. The LCD displays a day of the week. Use the or keys to change the day if it is not correct. 12. Press OK once. The day is now set. 13. The LCD displays Success. NOTE: The LCD does not display the clock on the screen during normal operation. To view the current time, press and hold the Light bulb key until the LCD displays the time.
RadioShack 8-in-1 LCD ENG.fm Page 12 Friday, February 9, 2007 6:11 PM 9. Aim the remote control at your device (for example, TV). Press any key but OK , , , or EXIT to test that the remote control works with your device. Use the keys to select a different code within the same brand, if any. Press OK to save. 10. The LCD displays Success. 11. The LCD displays Edit Text.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.fm Page 14 Friday, February 9, 2007 6:11 PM Programming a Device by Searching for Its Code If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code. For example, to search for a code for your TV: Press and hold P until the LCD displays Code Set OK or . 2. Press OK. 3. Use the key to scroll through the LCD display until the LCD displays Search. 4. Press OK once. 5.
RadioShack 8-in-1 LCD ENG.fm Page 15 Friday, February 9, 2007 6:11 PM USING MY SYSTEM MODE The RadioShack 8-in-1 LCD Remote includes a custom Home Theater mode. After the My System key is programmed, it will allow you to access four groups of remote control keys without having to change device modes.
RadioShack 8-in-1 LCD ENG.fm Page 16 Friday, February 9, 2007 6:11 PM If the default settings fit your needs, you can skip programming this mode. Otherwise, perform the steps in the following section to assign device modes to the Control Groups. PROGRAMMING MY SYSTEM MODE Press and hold P until the LCD displays Code Set OK or . Use the keys to scroll through the LCD until My System OK or is displayed. Press OK. 2. The LCD displays Channel OK or . Press OK. 3. The LCD displays Press Mode or . 4.
RadioShack 8-in-1 LCD ENG.fm Page 17 Friday, February 9, 2007 6:11 PM • For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learning. Programming a Learned Key 1. Press and hold P until the LCD displays Code Set OK or . Use the keys to scroll through the LCD display until Learn is displayed. Press OK. 2. The LCD displays Add Learn OK or . Press OK. 3.
RadioShack 8-in-1 LCD ENG.fm Page 18 Friday, February 9, 2007 6:11 PM 3. 4. 5. 6. 7. 8. 9. The LCD displays Press Mode or . Press the mode key once (i.e., TV, VCR , PVR, CBL/ SAT, CD, DVD, AUX, or AUDIO) for the mode you want to delete the learned key from. The LCD displays DLT Key or . Press OK. The LCD displays Select Key or . Press the key containing the learned function to be deleted. The LCD displays Are U Sure OK or . Press OK. The LCD displays Success. Repeat steps 5 through 7 for another key.
RadioShack 8-in-1 LCD ENG.fm Page 19 Friday, February 9, 2007 6:11 PM The LCD displays Press To Mode. For the destination mode, press a desired device key once (i.e., AUX, CBL/SAT, CD, TV, DVD, AUDIO, VCR, or PVR). For this example, press DVD once. 8. The LCD displays Press To Key. For the destination key, press a key to be moved once. For this example press VOL once.Upon keymoving, the LCD displays Success. 9. Repeat steps 3 to 8 to move additional keys.
RadioShack 8-in-1 LCD ENG.fm Page 20 Friday, February 9, 2007 6:11 PM PROGRAMMING FAVORITE CHANNEL SCAN The remote allows you to store a list of up to 10 favorite channels, in any order, that are immediately scanned when you press FAV (SCAN). NOTE: You can only store channels from one device for Favorite Channel Scan. 1. Press and hold P until the LCD displays Code Set OK or . 2. Use the use the or keys to scroll through the LCD display until Fav Ch is displayed. Press OK. 3.
RadioShack 8-in-1 LCD ENG.fm Page 21 Friday, February 9, 2007 6:11 PM To set the Power macro: 1. Press and hold P until the LCD displays Code Set OK or . 2. Use the or keys to scroll through the LCD display until Macro is displayed. Press OK. 3. The LCD displays PWR Macro. Press OK. 4. The LCD displays Add Macro. Press OK. The LCD displays Press Mode IN or . 5. Press the mode key for each device you want to add to the power macro in the order they should execute when the macro is activated. 6.
RadioShack 8-in-1 LCD ENG.fm Page 22 Friday, February 9, 2007 6:11 PM 6. 7. The LCD displays Press Keys In. When you press you can continue reading instructions. Press the keys for the macro in the order they should occur. For example, press TV and then Chan . When you have finished programming your key macro, press and hold P until the LCD displays Success and exits. DELETING A KEY MACRO To delete a key macro, perform the following steps: 1. Press and hold P until the LCD displays Code Set OK or . 2.
RadioShack 8-in-1 LCD ENG.fm Page 23 Friday, February 9, 2007 6:11 PM 8. 9. The LCD displays Press Keys In. When you press you can continue reading instructions. Press keys in the order they should occur in your time macro. After the first key press, the LCD displays Hold P to Save. Press and hold P until the LCD displays Success and exits. Setting a Weekly Time Macro 1. Press and hold P until the LCD displays Code Set OK or . 2.
RadioShack 8-in-1 LCD ENG.fm Page 24 Friday, February 9, 2007 6:11 PM 7. The LCD displays Are u sure OK or . Press OK. The LCD displays Success and the remote exits. CHANGING VOLUME LOCK The RadioShack 8-in-1 LCD Remote comes preset to allow independent volume control of each selected device (Global Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one device's volume controls volume in all other modes.
RadioShack 8-in-1 LCD ENG.fm Page 25 Friday, February 9, 2007 6:11 PM Unlocking All Volume Control (Restoring Global Unlock) 1. Press and hold P until the LCD displays Code Set OK or . 2. Use the or keys to scroll through the LCD display until Vol Lock is displayed. Press OK. 3. Use the or keys to scroll through the LCD display until Unlock All is displayed. Press OK. 4. The LCD displays Are you sure or . Press OK. 5. The LCD displays success and the remote exits.
RadioShack 8-in-1 LCD ENG.fm Page 26 Friday, February 9, 2007 6:11 PM RESETTING THE REMOTE Your RadioShack 8-in-1 LCD Remote allows you to reset your remote. Doing so clears all setup features not related to ID code setup (for example, macros, Key Mover, volume lock, etc.). To Reset Your Remote: 1. Press and hold P until the LCD displays Code Set OK or . 2. Use the or keys to scroll to Reset. Press OK. 3. The LCD displays User Reset OK or . Press OK. 4. The LCD displays Are U Sure. Press OK. 5.
RadioShack 8-in-1 LCD ENG.fm Page 27 Friday, February 9, 2007 6:11 PM TROUBLESHOOTING PROBLEM: LED does not blink when you press a key. SOLUTION: Replace batteries with four (4) new AAA alkaline batteries. PROBLEM: LED blinks when you press a key, but device does not respond. SOLUTION: Make sure the remote is aimed at your device and is not more than 15 feet away. PROBLEM: LED blinks one long blink. SOLUTION: An entry error has occurred (for example, wrong key). Try entry sequence again.
RadioShack 8-in-1 LCD ENG.fm Page 28 Friday, February 9, 2007 6:11 PM turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.
RadioShack 8-in-1 LCD ENG.fm Page 74 Friday, February 9, 2007 6:11 PM LIMITED 90-DAY WARRANTY This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. For complete warranty details and exclusions, check with your local RadioShack store.