DVR User Manual

6
4. Choose one of the following options:
• If you have a standard-screen (4:3)
HDTV, press
A
.
• If you have a wide-screen (16:9) HDTV,
press
B
.
5. Choose one of the following options:
• To choose the Quick Setup option
press
A
. Press to begin watching
television.
• To choose the Standard Setup option press
B
; then follow the on-
screen instructions. When you finish, press to exit the setup. Then
press to begin watching television.
• To choose the Custom Setup option, press ; then follow the on-screen
instructions. When you finish, press to exit the setup. Then press
to begin watching television.
Setting Up Your Explorer 8000HD DVR With an SDTV
If you have a standard-definition TV (SDTV), use the composite outputs to
connect the DVR to your TV. Refer to the Explorer 8000 Home Entertainment
Server User’s Installation Guide (part number 4002771) for connection
information.
Follow these steps to start the Setup Wizard.
1. Make sure that the Explorer DVR is Off and the TV is On.
2. On the Explorer DVR, press Guide and Info at the same time. The TV
Connection Set-up screen appears, and the front panel LED displays either
HD-1 or SD-1. This LED changes between HD-1 and SD-1 every few
seconds.
3. When the front panel LED displays SD-1, press . Press to begin
watching television.