Network Device User's Guide DPC2505TM, EPC2505TM

12 4015259 Rev B
Back Panel Description
Back Panel Description
The following illustration describes the back panel components of the DPC2505 and
EPC2505 wideband cable modems.
1 POWER 12VDC—Connects the cable modem to the DC output of the AC
power adapter that is provided with your cable modem. Only use the AC
power adapter and power cord that is provided with your cable modem
CAUTION:
Avoid damage to your equipment. Only use the AC
power adapter and power cord that is provided with
your cable modem.
2 ETHERNET—RJ-45 Gigabit Ethernet port connects to the Ethernet port
on your PC
3 RESET—Reset-to-Default button (Factory Reset)
Note: This button is for maintenance purposes only. Do not use unless
told to do so by your service provider.
4 USB—USB 2.0 port connects to the USB port on your PC
5 CABLE—F-Connector connects to an active cable signal from your
service provider