PHONES (044) 360-7-130 (050) 336-0-130 (063) 788-0-130 (067) 233-0-130 (068) 282-0-130 Internet store of autogoods ICQ 294-0-130 597-0-130 SKYPE km-130 CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories | CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model compute
DUAL DIN SIZED CD RECEIVER DPX503U DPX303 DPX313 INSTRUCTION MANUAL a u . m o .c 0 3 1 Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands © B64-4227-00/00 (EW/ E2W) Autogood products internet store http://130.com.ua B64-4227-00_00_DPX503U_En.indd 1 08.7.
Contents Before use 3 Basic Operation Audio Adjustments 4 General functions Tuner functions Disc & Audio file play functions Function Control 6 Display Settings 9 About Display Type Text Display Selection Illumination Color Selection Illumination Color Preset Memory Illumination Color Preset Recall Disc Naming (DNPS) Auxiliary Input Display Setting Opening message edit Basic Operations of remote control 25 Appendix Music disc/Audio file Operation 13 Music Select Direct Music Search Direct Disc
Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the (page 18). How to reset your unit • If this unit or the connected unit (disc auto changer, etc.
Basic Operation [ ] Disc slot [SRC] [FNC] [TI] Control knob [AUD] [ATT] [1]—[6] USB Terminal Auxiliary input (DPX503U only) General functions Power/Source Select button : [SRC] Turns on the power. When the power is ON, select a source. SRC Select mode 1: Press the [SRC] button and then turn the Control knob or push it toward left or right. To determine the selected source, press the Control knob. SRC Select mode 2: Pressing this button each time switches between sources.
Pause and play : Control knob Switches between pause and play each time the center is pressed. Tuner functions Band select : Control knob Switches between FM1, FM2, and FM3 each time pushing toward up. Switches to AM when pushing toward down. Tuning : Control knob Changes the frequency when pushing toward left or right. USB device removing (DPX503U only) : [0] Press this button for 2 seconds or longer to select the remove mode, and the remove the USB device.
Function Control Functions in the table below can be set up by using Function Control. Category Item MENU “Security Set”/ “Security Clear” “SRC Select” Setting Entry Setting overview 1 sec. Sets/Resets security code “1”*/ “2” Sets the source selection method. 27 “iPod Mode”*1 “OFF”/ “ON”* 13 “AT COL CHG”*1 “OFF”/ “iPod”* “Beep” “OFF”/ “ON”* When set to “ON”, allows you to select music in the manner similar to that of the iPod.
Category Item “Russian”*3 Setting “OFF”/ “ON”* “Auto”/ “Manual”* “Built in AUX” “OFF”/ “ON”* When set to “Auto”, scrolls the screen once with the change of the displayed text. Sets whether to display AUX during source selection. “Power OFF” “-----”/ “20min”*/ “40min”/ “60min” “1”*/ “2” Turns off the power when the preset time has lapsed in the Standby mode. Sets the CD read mode.
Function Control Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed. : Can be set in other than standby state. : Can be set in standby state. : Can be set while Audio file source of CD/USB/iPod. : Can be set while Audio file source of CD/USB (excluding iPod). : Can be set while CD/ Disc changer source. : Can be set while Disc changer source. : Can be set during Tuner source. : Can be set during FM reception.
Display Settings About Display Type Shown below are examples of display types. Display “TYPE [A]” Display Type 1 3 “TYPE [B]” 2 1 3 “TYPE [C]” 1 4 5 “TYPE [D]” 6 1 Text display part 2 Status display 3 Icon display part 4 Display (varied depending on the source) 5 Clock display 6 Spectrum Analyzer display Changing the text display.
Display Settings Function of DPX503U Function of DPX503U Illumination Color Selection Illumination Color Preset Memory Selecting the Illumination Color of the panel. Saving the combination of the Illumination Colors selected for each place. The memory cannot be erased by the Reset button. 1 Enter Illumination Color Selection mode Select “Color” . For how to select Function Control item, refer to (page 6).
Function of DPX503U Disc Naming (DNPS) Illumination Color Preset Recall Attaching a title to a CD. Recalling the selection you saved in Illumination Color Preset mode. 1 Enter Audio Preset Recall mode Select “COLOR” > “PRESET” > “RECALL”. For how to select Function Control item, refer to (page 6). 2 Recall the Illumination Color Preset 1 Play the disc you want to attach a name to 2 Select Name set mode item during Menu mode Select the “Name Set” display.
Display Settings Auxiliary Input Display Setting Opening message edit Selects the display below when changing to Auxiliary input source. Setting the opening message to be displayed when the power is turned on. 1 Select Auxiliary input display setting item 1 Select Opening message edit item during during Menu mode (In AUX mode) Select the “Name Set” display. For how to select Function Control items, refer to (page 6).
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the device or media being played now. Searchs the music by entering the track number. 1 Enter Music Select mode Press the number buttons on the remote control. Turn the Control knob. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button.
Music disc/Audio file Operation Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the “CD Changer” display. For how to select source item, refer to of (page 4). Music search Push the Control knob towards right or left. Disc Search Push the Control knob towards up or down. Playing the Current Song or Disc Repeatedly. (Repeat play) Press the [4] button.
Tuner Operation Station Preset Memory Function of remote control Putting a station in the memory. Direct Access Tuning 1 Select the frequency to put in the memory Push the Control knob towards right or left. 2 Enter Preset Memory mode Select “P.MEM”. For how to select Function Control item, refer to (page 6). 3 Select the number to put in the memory Turn the Control knob. 4 Determine the number to put in the memory Press the Control knob.
Tuner Operation PTY (Program Type) Program Type preset Selecting the Program Type below and searching for a station; Putting the Program Type in the Preset button memory and quick recall.
Other Functions Activating Security Code Deactivating Security Code ⁄ To deactivate the Security Code function. • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Select Security Code item during Menu 1 Select Security Code item during Menu mode (In Standby mode) “Security Set” is displayed. For how to select Function Control items, refer to (page 6).
Other Functions Manual Clock Adjustment Demonstration mode setting 1 Select Clock Adjustment item during Menu Turning the demonstration mode ON/OFF. mode Select the “Clock Adjust” display. For how to select Function Control items, refer to (page 6). 2 Enter Clock adjustment mode Press the Control knob for at least 1 second. The clock display blinks.
Audio Adjustments Function of DPX503U Function of DPX503U Cabin selection DTA (Digital Time Alignment) setting You can compensate the delay of the sound arrival time, which is caused by the installation position of the speakers, by selecting your environment from the following car types; Adjusting fine tuning of the speaker position compensation value specified at (page 19). Car type (rear speaker position) Not compensating.
Audio Adjustments Function of DPX503U 2 Select the item you want to set X’Over setting Turn the Control knob and push the center when the desired item is displayed.
Function of DPX503U Function of DPX503U Manual position setting Audio Preset Memory Making fine adjustment of the value specified at Preset position selection per speaker. Registering the value setup by Sound Control. The memory cannot be erased by the Reset button. 1 Enter Position setting mode 1 Setup Sound Control Select “SOUND” > “S-CTRL” > “POSIT” > “M-POSI”. For how to select Function Control item, refer to (page 6).
Audio Adjustments Function of DPX503U Audio Control Audio Preset Recall You can adjust following Audio Control items ; Recalling the sound setup registered by
Audio Setup Speaker Setting You can set Sound system , such as follows; Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Adjustment Item Display Front High Pass Filter* “HPF-F” Rear High Pass Filter* “HPF-R” Low Pass Filter* “LPF” Subwoofer Phase* Volume offset Loudness* Dual Zone System “SW PHASE” “VOL-OFFSET” “LOUD” “2 ZONE” Range Through/40/60/80/100/120/ 150/180/220 Hz Through/40/60/80/100/120/ 150/180/220 Hz 50/60/80/100/120/Through Hz Reverse (180°)/
Audio Adjustments Function of DPX303/DPX313 Function of DPX303/DPX313 Audio Preset Memory Audio Preset Recall Registering the value setup by Sound Control. The memory cannot be erased by the Reset button. Recalling the sound setup registered by
Accessory of DPX503U/DPX313 Basic Operations of remote control In Tuner source SRC VOL SRC ATT ATT Band select [FM]/[AM] VOL AUD AUD Station select [4]/[¢] Recall preset stations FM/AM DIRECT 2-ZONE In CD/USB source (page 15) 0—9 Music select [4]/[¢] Folder/Disc select Pause/Play a u . About [ ] This button is used when Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. General control Source select m o .
Appendix About Audio file About USB device • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • USB device Playable Model DPX503U • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.
For operating KCA-BT100 (Optional) Function Control Glossary However, the following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction. 1–3. Operation is the same. Refer to the instruction manual of KCA-BT100. 4. Press the Control knob. 5. Select “YES” using the Control knob. 6. Press the Control knob. 7. Press the [FNC] button.
Appendix • News (News Bulletin with Timeout Setting) Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing “News 00min” to “News 90min” turns this function ON. If news bulletin starts when this function is ON, “Traffic INFO” is displayed and news is received. If “20min” is has been set, reception of another news bulletin will not start for 20 minutes.
• DTA (Digital Time Alignment) Make fine adjustment of the delay time of the speaker output specified at (page 19) to have a more suitable environment for your vehicle. The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior.
Accessories/ Installation Procedure ¤ Accessories 1 ..........1 2 ..........2 Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5.
Connecting Wires to Terminals To External Display/ Steering remote FM/AM antenna input (JASO) Front preout Rear/SubWoofer preout Fuse (10A) a u . To Kenwood disc changer/ External optional accessory To connect these leads, refer to the relevant instruction manuals. ⁄ Wiring harness (Accessory1) m o .c TEL mute wire (Brown) MUTE 0 3 1 Connect to the terminal that is grounded when either the telephone rings or during conversation.
Connecting Wires to Terminals Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Functions 2WARNING Connecting the ISO Connector Yellow Blue/White Orange/White Red Black Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.
Installation/Removing the Unit Installation Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Accessory2 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. 2 When the upper level is removed, remove the lower two locations. ⁄ ⁄ • Make sure that the unit is installed securely in place.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up the High Pass Filter. • Cannot set up the Fader. • No Audio control effect on AUX. • Cannot set up the subwoofer position of Manual position setting. ▲ • Preout is not set to subwoofer. ☞ “MENU” > “SWPRE” of (page 6) • of (page 4) is not set to On. • The Dual zone function is enabled.
The messages shown below display your systems condition. TOC Error: • No disc has been loaded in the disc magazine. • The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. Error 05: The disc is unreadable. Error 77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the “Error 77” code does not disappear, consult your nearest service center. Mecha Error/ Mecha ERR: Something is wrong with the disc magazine.
Specifications FM tuner section USB Interface (DPX503U) Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 μV/75 Ω Frequency response (±3.0 dB) : 30 Hz – 15 kHz Signal to Noise ratio (MONO) : 65 dB Selectivity (DIN) (±400 kHz) : ≥ 80 dB Stereo separation (1 kHz) : 35 dB USB Standard : USB1.1/ 2.