- Scientific-Atlanta, Inc. VoIP Cable Modem User's Guide

Telephone Service: Mount the Battery Pack on a Wall, Continued
Before You Begin
Before you begin, choose an appropriate mounting place. The wall can be made of
cement, wood, or drywall. The mounting location should be free of obstructions on
all sides, and the cables should be able to easily reach the cable modem without
strain. Leave sufficient clearance between the bottom of the cable modem, and any
flooring or shelving underneath, to allow access to cabling. In addition, leave enough
slack in all cables so that the cable modem can be removed for any required
maintenance without disconnecting the cables. Also, verify that you have the
following items:
• Two wall anchors for #8 x 1 inch screws
• Two #8 x 1 inch pan head sheet metal screws
• Drill with a 3/16-in. wood or masonry bit
Using the Wall-Mounting Template
The following page shows the wall-mounting template. Copy this page and use that
copy of the wall-mounting template to mark the mounting screw locations.
Important: Use the mounting slots labeled “A” on the template for vertical
mounting, or use the mounting slots labeled “B” on the template for horizontal
mounting.
Continued on next page
4004041 Rev B WebSTAR DPX2203 or EPX2203 VoIP Cable Modem User’s Guide 41