User's Guide

© 2019 Scientific Games Corp. and its Subsidiaries. All rights reserved. Unauthorized Distribution Prohibited. CONFIDENTIAL
MPS Card Reader Installation Guide SY-TP009200[B] 11 March 2019
12
Instructions
3 Secure the two bottom standoffs of the Front Bezel and Rear Board Assembly to the bottom of the Adaptor
Bezel of the Card Reader Body with two Collar Nuts, Figure 10 (A), using a 1/4-inch nut driver.
CAUTION
Do not over-tighten the Collar Nuts. This could bend the Rear Board and break its
traces.
Figure 10 Bottom of Front Bezel and Rear Board Assembly Attaching to Bottom of Card Reader Body
Figure 11 MPS Card Reader Assembly without Cables
A
Draft Copy
11 March 2019