Rotator User Manual MX-RD-Pro LCD digital Rotator MX-RL-Pro LCD digital Rotator Please read the User Manual carefully before use, and follow all operating and safety instructions! www.scilogex.
Contents Preface................................................................................. 1 Service................................................................................. 1 Warranty .............................................................................. 1 1. Safety Instructions....................................................... 2 2. Proper Use ................................................................... 3 3. Inspection .....................................................
Rotator Please provide the customer care representative with the following information: Preface Welcome to the “Rotator User Manual”. Users should read this manual carefully, follow the instructions and procedures, and beware of all the cautions when using this instrument. Service • • • • Serial number ( on the rear panel ) Certification Description of problem ( i.e.
Rotator 1. Safety Instructions Warning! • Read the operating instructions carefully before use. • Ensure that only trained staff works with the instrument. Protective ground contact！ • • • If the instrument does not run smoothly, please decrease the motor speed. • Firmly secure the accessories and vessels in place to avoid damage or risk. • Preparation of samples may lead to dangerous flammable. Only process samples that will not react dangerous.
Rotator 2. Proper Use 3. Inspection The instrument is designed for mixing sticky substance in schools, laboratories or factories. It can be installed on a variety of impeller, for different viscosity of the medium. This instrument is not suitable for using in residential areas or other constraints mentioned in Chapter 1. Do not use the accessories recommended by the manufacturer, or failure to use the instructions, may be caused unsafe situation. 3.
Rotator 4. Function 4.
Rotator Items system stops running. Default settings Mode switch button Mode Shift speed and time display. LCD display LCD displays the real working state and all setting values. Speed /timer control knob Set speed and time by rotating speed/timer control knob. Push on/off to start/stop rotating function. Power switch I/O Switch ON or OFF the instrument. Speed/timer light Speed/Timer Green/Red LED display light.
Rotator be automatically halted and an alert will sound. If these operations above are normal, the instrument is ready to operate. If not, the instrument may be damaged during transportation, please contact technical support of manufacturer/supplier. 5. Operation • Place the Rotator in safe and stable surface, ensure the required operating voltage and power supply voltage matched, and the socket must be earthed reliably. • • • • Connect the power cable. Switch ON instrument.
Rotator Note: • Electronic device cannot clean with cleanser. • If you require maintenance service, must be cleaned the instrument in advance to avoid pollution of hazardous substances, and to send back into original packing. • If the instrument will not use for a long time, please switch off and place in a dry, clean, room temperature and stable location. 7. Maintenance and Cleaning • Proper maintenance can keep instrument working properly and lengthen its lifetime.
Rotator Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Rotator 824222019999 MX-RL-Pro, LCD Digital Rotator, used with rotisserie accessories, variable speed，adjustable mixing angle, US plug, 100V-240V, 50Hz/60Hz 824222119999 MX-RL-Pro, LCD Digital Rotator, used with rotisserie accessories, variable speed，adjustable mixing angle, Cn plug, 100V-240V, 50Hz/60Hz 824222219999 MX-RL-Pro, LCD Digital Rotator, used with rotisserie accessories, variable speed ， adjustable mixing angle, Euro plug, 100V-240V, 50Hz/60Hz 824222319999 MX-RL-Pro, LCD Digital Rotator,
Rotator Cat. No Descriptions Cat. No Descriptions 18900138 Disk, 15ml centrifuge tube, capacity: 16ea 18900145 1.5ml Centrifuge tube, capacity: 32ea, vertical mount 18900139 Disk, 50ml centrifuge tube, capacity: 8ea 18900146 15ml Centrifuge tube, capacity: 16ea, vertical mount 18900140 Post for together 18900147 50ml Centrifuge tube, capacity: 16ea, vertical mount 18900142 1.
Rotator Installing rotisserie attachment Changing attachment 11
SCILOGEX, LLC 500 Four Rod Road Suite 122 Berlin, CT 06037 USA Tel: 1-860-828-5289 Fax:1-860-828-5389 E-mail: info@scilogex.com Http://www.scilogex.
