Installation manual

SCION xD/xB 2008- LEATHER STEERING WHEEL
Procedure
Page 6 of 12 pages
Issue: B 04/18/07
DIO only
9. Install Lower Cover to Leather Steering
Wheel.
(a) Set the two Torx bolts on the lower cover.
(Fig. 9-1).
(b) Fix the lower cover to the leather steering
wheel assembly with the two tapping screws.
(1) Tighten screws to 0.8 N-m (7.2 lbf-in)
(2) Be sure not damage the lower cover
when installing the parts by opening the
tabs.
10. Install Cruise Control Switch.
(If equipped)
(a) Install the cruise control switch, following
the arrow and fix it with the two screws.
(Fig. 10-1).
(1) Tighten screws to 1.7 N-m (15.6 lbf-in)
(b) Connect 2P connector of the cruise control.
(If equipped)
(c) Fix the steering switch assembly harnesses
to each lower cover hook. (Fig. 10-1-1 and
10-1-2)
(1) Be cautious not to scratch the design face
with the the stalk of the switch when
installing it.
(2) Make sure that harness of the cruise
control switch assembly does not
interfere with moving section or is not
caught in the section.
Screw
Fig. 9-1
Tabs x2
Screw
Philli
p
s Screwdriver
,
Tor
q
ue Wrench
Setting of
Torx Bolts
Lower Cover
Side Tabs
Cruise Control Switch
Screws x2
Fig. 10-1
Phillips Screwdriver, Torque Wrench
Installing
Direction
3P Connecto
r
Lower Cover Hoo
k
Lower Cover
Hook
Lower Cover Hook
Fig. 10-1-2
Fig. 10-1-1