Installation manual

MAN-10001-REV1
Page 14 of 76
2 - Removing the Front Fascia
1. Using a 10mm socket and flat head screwdriver, remove the 2 body clips and the 1 bolt that
attaches the front splitter. SEE FIGURE 2.1 & 2.2
FIGURE 2.1
FIGURE 2.2
2. Using a small flat head screwdriver, push down into the fasteners on the top air diversion plate and
then lift up the fastener. Remove the air diversion plate. SEE FIGURES 2.3, 2.4, & 2.5
FIGURE 2.3
FIGURE 2.4