Installation manual

MAN-10001-REV1
Page 15 of 76
FIGURE 2.5
3. Using a flathead screwdriver, lift up and remove the 2 body clips near the inside of the headlights.
There is one body clip per side. Also remove the body clip in the center near the hood latch.
SEE FIGURES 2.6 & 2.7
FIGURE 2.6
FIGURE 2.7
4. Gently pull each side of the bumper towards the outside. The bumper should “pop” out of its
connections. SEE FIGURE 2.8 & 2.9
FIGURE 2.8
FIGURE 2.9