Installation manual

MAN-10001-REV1
Page 17 of 76
3 - Removing the OEM Battery and Battery Tray
1. Using a 10mm socket or wrench, remove the negative and positive battery terminals.
SEE FIGURE 3.1 & 3.2
FIGURE 3.1
FIGURE 3.2
2. Use a 10mm socket to remove the factory battery tie down. SEE FIGURES 3.3 & 3.4
FIGURE 3.3
FIGURE 3.4
3. Carefully remove the OEM battery as it is extremely heavy. SEE FIGURE 3.5
FIGURE 3.5