Installation manual

MAN-10001-REV1
Page 19 of 76
4 – Removing the OEM Exhaust Manifold and Heat Shield
1. Using a 12mm socket, remove the bolts on the top of the heat shield. SEE FIGURES 4.1 & 4.2
FIGURE 4.1
FIGURE 4.2
2. Using a 12mm socket and wrench, remove the lower bolts holding the heat shield in place on the
driver side (4.3) and passenger side (4.4). SEE FIGURES 4.3 & 4.4
FIGURE 4.3
FIGURE 4.4