Installation manual

MAN-10001-REV1
Page 21 of 76
6. Prepare to remove the factory O2 sensor. SEE FIGURE 4.10
FIGURE 4.10
7. Using an O2 socket or adjustable wrench, remove the O2 sensor. BE CAREFUL – if caution is not
taken when removing the sensor, the O2 sensor can strip causing difficulty for removal or when the
time comes to reinstall the O2 sensor. SEE FIGURE 4.11 & 4.12
FIGURE 4.11
Figure 4.12
8. Underneath the engine, disconnect the OEM S-Pipe. See FIGURE 4.13
FIGURE 4.13