Installation manual

MAN-10001-REV1
Page 22 of 76
9. Using a 12mm socket and 12mm wrench combo, unbolt the factory S-Pipe from the factory exhaust
manifold and let it hang out of the way. SEE FIGURES 4.14 & 4.15
FIGURE 4.14
Figure 4.15
10. Unplug the OEM oil pressure sensor. See FIGURE 4.16
FIGURE 4.16
11. Carefully unscrew the OEM oil pressure sensor from the block and set aside in a safe place. Removal
of this piece is necessary to prevent potential damage when removing the exhaust manifold.
SEE FIGURES 4.17 & 4.18
FIGURE 4.17
Figure 4.18