Installation manual

MAN-10001-REV1
Page 23 of 76
12. Using a 14mm socket, remove the 5 nuts that hold the exhaust manifold to the engine block.
SEE FIGURES 4.19 & 4.20
FIGURE 4.19
FIGURE 4.20
13. Using a 14mm socket or wrench, remove these lower bolts holding the exhaust manifold to the
bottom of the engine block. In Figure 4.22, remove the circled bolt. SEE FIGURES 4.21 & 4.22
FIGURE 4.21
FIGURE 4.22
14. Carefully slide out and remove the exhaust manifold. SEE FIGURES 4.23, 4.24, 4.25 & 4.26
FIGURE 4.23
FIGURE 4.24