Installation manual

MAN-10001-REV1
Page 25 of 76
5 - Removing the OEM Intake System and Air Box
1. Unclip the MAF sensor. SEE FIGURE 5.1 & 5.2
FIGURE 2.1
FIGURE 2.2
2. Gently pull the harness off of the clip holding it to the top of the air box then remove the breather
hose (Figure 5.4) from the top of the valve cover. SEE FIGURES 5.3 & 5.4
FIGURE 5.3
FIGURE 5.4
3. Unclip the left and right sides that hold the top of the air box in place. SEE FIGURE 5.5 & 5.6
FIGURE 5.5
FIGURE 5.6