Installation manual

MAN-10001-REV1
Page 26 of 76
4. Open this clamp that is attached to the throttle body using long-handled needle nose pliers.
SEE FIGURES 5.7
FIGURE 5.7
5. Remove the screw holding this solenoid in place on the back side of the intake tube then remove the
top of the air box from the engine bay. SEE FIGURE 5.8 & 5.9
FIGURE 5.8
FIGURE 5.9
6. Using a 10mm socket, remove the 3 bolts holding the lower air box in place. SEE FIGURE 5.10 & 5.11
FIGURE 5.10
FIGURE 5.11