Installation manual

MAN-10001-REV1
Page 28 of 76
6 - Removing the OEM Radiator and Installing the SPAL Fan
1. Unclip the factory horns and pull the pictured hose out of its clamp. SEE FIGURE 6.1 & 6.2
FIGURE 6.1
FIGURE 6.2
2. Using a small flat head screwdriver, carefully insert the screwdriver in the indented slot on the
plastic clip and pry on the internal tab to release from the metal bracket. SEE FIGURES 6.3 & 6.4
FIGURE 6.3
FIGURE 6.4