Installation manual

MAN-10001-REV1
Page 3 of 76
 Standard selection of automotive tools, primarily metric sizes.
 Electrical wire cutting/crimping tool.
 Utility knife
 Electrical tape.
 An assortment of zip ties.
 The ability to securely lift the vehicle at least a few feet off the ground.
 NPT thread sealant.
 Replacement engine oil and oil filter.
 Replacement factory exhaust manifold gasket.
TORQUE RECOMMENDATION: When removing and re-installing factory fasteners, refer to the Scion
service manual for torque values. When installing fasteners included in this kit, refer to the following
chart:
FASTENER SIZE
TORQUE (FOOT POUND)
6mm
12
8mm
22
10mm
30
NPT fittings
2-3 turn past finger tight
TURBOCHARGER SYSTEM PARTS LIST (Included with Part# PTP-TBK-10004-RED/BLK/POL):
PACKAGE PART #:
PART #:
Qty/Kit
DESCRIPTION
PTP-PKG-10004-1
PTP-TBM-10004
1
PTUNING Full 304SS Equal-Length Competition
Turbo Manifold Flanged for 40mm WG
PTP-DNP-10004
1
2.5" 4-bolt 304SS Downpipe with OEM-Style
Donut Gasket Flange
PTP-GSK-90010
1
2.5" Donut Gasket G20B-S
PTP-FAS-90050-25
4
M8 x 1.25 x 25mm Flanged Hex Head Cap
Screw (Class 10.9, Black-oxide)
PTP-WGD-10004
1
1.75" x 12" 304SS Dump Tube
PTP-PKG-10004-2
PTP-TRG-90000
1
Garrett T3/TO4E T3 57 Trim Stage 3 turbine
housing, flange w/2.5" 4-bolt T31 outlet (.82
A/R)
PTP-FTG-90032
1
1/8" NPT x 3/16" 90 Degrees Hose Adaptor
(Brass) (for Compressor housing to
Wastegate)