Installation manual

MAN-10001-REV1
Page 30 of 76
5. Using a 12mm socket, remove 1 bolt that secures the center radiator bracket. SEE FIGURE 6.9 & 6.10
FIGURE 6.9
Figure 6.10
6. Using a 12mm socket, remove the bolts on the driver side followed by the passenger side that hold
the top radiator support in place. SEE FIGURES 6.11 & 6.12
FIGURE 6.11
Figure 6.12
7. Lift up the top radiator support. Remove the clip underneath that is attached to the hood latch
release cable. SEE FIGURE 6.13 & 6.14
FIGURE 6.13
Figure 6.14