Installation manual

MAN-10001-REV1
Page 31 of 76
8. Set the top radiator core support aside. See FIGURE 6.15
FIGURE 6.15
9. Using a 10mm socket, remove the 2 bolts that hold the plastic radiator shroud in place.
SEE FIGURES 6.16 & 6.17
FIGURE 6.16
Figure 6.17
10. Not pictured are plastic tabs that are holding the plastic shroud in place on the backside. Use a
flathead screwdriver to release these tabs while pulling up on the shroud. SEE FIGURES 6.18 & 6.19
FIGURE 6.18
Figure 6.19