Installation manual

MAN-10001-REV1
Page 35 of 76
21. When the SPAL fan has been aligned and oriented in the proper direction, use one of the provided
plastic mounting ties to push through the mounting hole on the SPAL fan and out the front side of
the radiator. SEE FIGURE 6.31 & 6.32
FIGURE 6.31
FIGURE 6.32
22. Once the plastic mounting tie has been pushed through place a foam sticky pad over the tie.
Remove the tie and re-inset through the hole in the sticky pad. SEE FIGURES 6.33 & 6.34
FIGURE 6.33
FIGURE 6.34