Installation manual

MAN-10001-REV1
Page 36 of 76
23. Push the plastic mounting tie all the way through the radiator. Then take another foam sticky pad
and place it over the plastic tie and stick it to the radiator on the back side. SEE FIGURE 2.1 & 2.2
FIGURE 6.35
FIGURE 6.36
24. Then take another foam sticky pad and place it over the plastic tie and stick it to the radiator on the
back side. SEE FIGURE 6.37
25. REPEAT step 24 for the other 3 mounting holes on the SPAL fan. Once this is complete, replace the
SPAL fan on the backside of the radiator with all of the plastic mounting ties passing through their
respective mounting holes. SEE FIGURE 6.38
FIGURE 6.37
FIGURE 6.38