Installation manual

MAN-10001-REV1
Page 37 of 76
26. Take the provided springs and place them skinny side down towards the SPAL fan. Then take one of
the provided mounting tie fasteners and push it down securely on the spring. This will ensure that
the SPAL fan stays in place. SEE FIGURE 6.39 & 6.40
FIGURE 6.39
FIGURE 6.40
27. Cut off the excess plastic tie. SEE FIGURES 6.41
FIGURE 6.41
28. Reinstall the radiator with the new SPAL fan.
29. Reinstall the plastic top radiator shroud as picture in FIGURE 6.17 & 6.18