Installation manual

MAN-10001-REV1
Page 40 of 76
7 – Install the Turbo Manifold and Turbocharger
1. The turbo manifold and turbocharger do not come pre-assembled. Assemble the turbo manifold and
turbocharger together before installing in to the engine bay with supplied M10 hex bolts and Nord-
Lock washers. SEE FIGURE 7.1
2. Attach the straight end of the turbocharger oil feed line to the -4AN flare fitting on the
turbocharger). SEE FIGURE 7.1 & 7.3
3. Install the aluminum oil return adaptor to the bottom of the turbocharger center housing using the
supplied gasket, split lock washer and 3/8” socket cap bolts. See Figure 7.3
4. Attach the straight end of the turbocharger oil return line to the -1AN flare fitting on the
turbocharger). SEE FIGURE 7.1 & 7.3
5. Install the turbo manifold and turbocharger assembly onto the engine block. SEE FIGURE 7.2
FIGURE 7.1
FIGURE 7.2