Installation manual

MAN-10001-REV1
Page 42 of 76
7. Install the Turbosmart EWG (external wastegate) onto the turbo manifold and orient the EWG in the
proper direction. When complete, install the provided DTA dump tube along with the supplied v-
clamp clamp and position it so that it does not come into contact with any part of the engine. SEE
FIGURE 7.7 & 7.8
NOTE: Be sure that the EWG valve seat is secured to the bottom of the EWG when installing the
EWG to the turbocharger manifold. SEE FIGURE 7.9
FIGURE 7.7
FIGURE 7.8
FIGURE 7.9