Installation manual

MAN-10001-REV1
Page 47 of 76
FIGURE 9.2
FIGURE 9.3
6. Once the T fitting has been tightened, make sure the threaded port of the fitting is facing
downward. Install and tighten the supplied 1/8 NPT to -4AN fitting to the bottom threaded port on
the T- fitting. SEE FIGURE 9.4
7. Screw the oil T-fitting with the OEM oil pressure sensor back into the head of the engine block
making sure it is oriented in the proper direction. SEE FIGURE 9.5
FIGURE 9.4
FIGURE 9.5