Installation manual

MAN-10001-REV1
Page 5 of 76
vacuum line)
PTP-PKG-10004-7
PTP-FTR-90001
1
2.00"D x 1.5" L x 5/8" ID K&N Crankcase Filter
(Rubber Top)
PTP-HSE-90007
1
5/8" ID x 3"L Crankcase Vent Hose (for
breather filter)
PTP-FAS-90011
1
1/8" x 7.5" Nylon Cable Tie (Black) (for
securing wastegate vacuum line)
PTP-CLP-90005
1
29/32" 304SS Worm-drive Hose Clamp (5/16"
Band)
PTP-PKG-10004-8
PTP-FAN-90004
1
SPAL 14" Curved Blade High Performance Fan
(12V, Pull)
PTP-PKG-10004-9
PTP-HAR-10005
1
Front WB O2 Extension Wire, 14" Long (18-
gauge, 2-BK,1-WH,1-BU)
PTP-ELE-90001
2
14-gauge Electrical Butt Connectors (Blue) (For
Fan Harness)
PTP-ELE-90002
8
18-gauge Electrical Butt Connectors (Red) (For
O2 Extension Wire)
PTP-ELE-90003-36
1
0.35" ID (1/2" OD) x 36" Long Plastic Wiring
Loom (Black/Gray Stripe)
PTP-HWR-90000-
2
1
DEI Heat Sheath (2"D x 18"L) (O2 Wiring)
PTP-FAN-90003
1
SPAL Fan Universal Mounting Kits (4 pins, 4
clips, 4 grommets)
PTP-PKG-10004-10
PTP-HSE-90025
1
-4AN Female-to-Female, 90 to straight, SS
Braided Oil Feed Line, 24" Long (1/4 hose)
PTP-FTG-90006
1
1/8" NPT Male to -4AN Male Fitting (steel) (oil
feed on cylinder head)
PTP-FTG-90007
1
1/8" NPT Female Union Tee Fitting (Nickel-
Plated brass) (oil feed on cylinder head)
PTP-FTG-90008-S
1
1/8" NPT Male to 1/8 BSP Male Hex Nipple
(Steel) (oil feed on cylinder head)
PTP-PKG-10004-11
PTP-FAS-90005
4
M10 x 1.5 x 30mm Flange Head Cap Bolt
(Black Oxide) (for T3 manifold to turbine
flange)
PTP-FAS-90002
4
3/8" x 0.826" OD Nord-lock Washer (Zinc-
plated) (Pair)
PTP-GSK-90001
1
Oil Return Gasket (T3/T04)
PTP-FAS-90003
2
3/8"-16 x 7/8"L Socket Head Cap Bolt (Zinc-
plated) (for oil return adaptor)