Installation manual

MAN-10001-REV1
Page 52 of 76
11 – Installing the Front Mount Intercooler Core
1. Remove the plastic tabs and bolt securing theplastic radiator air diversion panel beneath the driver-
side of the front bumper. Repeat the step for the passenger side panel. SEE FIGURE 11.1
2. Remove the air temp sensor from the lower front cross-member in front of the A/C condenser. SEE
FIGURE 11.2
FIGURE 11.1
FIGURE 11.2
3. Remove this center support bracket for the radiator. Measure 6” down from the top hole. From that
mark, cut everything below and to the right of that line. SEE FIGURE 11.3 & 11.4 & 11.5
FIGURE 11.3
FIGURE 11.4