Installation manual

MAN-10001-REV1
Page 68 of 76
25. Using a sharp razor blade or knife, carefully cut the plastic cover open that secures the MAF sensor
plug to the main harness, by about 3 inches. This procedure is necessary to extend the MAF sensor
plug to the MAF sensor location on the upper intercooler piping. SEE FIGURE 13.30 & 13.31
FIGURE 13.30
FIGURE 13.31
26. Install the MAF sensor onto the upper intercooler piping using the supplied 4mm socket cap screw.
Reconnect the MAF sensor plug to . SEE FIGURE 13.32 & 13.33
FIGURE 13.32
FIGURE 13.33