Installation manual

MAN-10001-REV1
Page 69 of 76
27. Install the supplied 2.75” ID x 1” long silicone coupler onto the compressor inlet. SEE FIGURE 13.33
& 13.34.
FIGURE 13.34
FIGURE 13.35
28. Install the supplied 3.00” ID x 2.25” long silicone coupler over the 2.25” ID coupler. Install the
supplied 3” ID aluminum intake tube and secure it to the compressor with the supplied worm
clamps. SEE FIGURE 13.36 & 13.37.
FIGURE 13.36
FIGURE 13.37