Installation manual

MAN-10001-REV1
Page 74 of 76
16 – Installing the AEM F/IC Unit and PnP Harness
1. Unplug the factory ECU harness. Flip the connector over and zip tie it to the bracket holding the
ECU. Using the PnP adapter harness, plug in the correct side to the factory ECU plug and the other
side to the actual factory ECU. SEE FIGURE 16.1 & 16.2
FIGURE 16.1
FIGURE 16.2
2. Run the harness along the firewall and through the grommet in the firewall on the passenger side of
the vehicle. Mount the FiC unit in the glove box of the vehicle and secure the harness to it.
SEE FIGURE 16.3, 16.4, & 16.5
FIGURE 16.3
FIGURE 16.4