Installation manual

MAN-10001-REV1
Page 76 of 76
17 – Final Checklist
1. Check all vacuum and boost lines to ensure that they are all secured and kink-free.
2. Check the exhaust manifold flange mounting bolts and torque to factory spec.
3. Verify that all factory connector plugs have been re-connected.
4. Verify that the intercooler piping does not rub against any exhaust components or vehicle chassis.
5. Refill engine with new motor oil to factory level and tighten oil drain plug. We highly recommend
the use of synthetic motor oil to help prolong the life of the turbocharger.
6. Only use premium unleaded fuel (93 octane or higher) for proper engine performance and to
reduce the possibility of engine damage from detonation.
7. Reconnect the negative terminal on the vehicle battery.
8. Cycle the ignition to the “ON” and then “OFF” position several time to pressurize the fuel system
and check for fuel leak.
9. Start the vehicle and check for any oil, fuel, or vacuum leaks.