Owner`s manual

TOYOTA Scion tC REFERENCE 400CF
Procedure
Issue A 08/01/11 Page | 15
4. Line up each bracket arm to their
corresponding mounting positions.
(Fig. 9-5)
a. Upper Short Arm to
10mm bolt location
b. Lower Long Arm to
12mm bolt location
5. Tighten by hand initially. If binding
occurs remove the bolt and
repeats steps.
6. Use socket wrench to tighten.
c. Re-install cabin filter cover and glove box.
Note: Refer to Page 7, Step 7, Section A
d. Connect the Quick-Sync Harness into the
Radio and factory harness using the
designated connectors. (Fig. 9-6)
e. Re-install Radio and Trim Panel in reverse
order. Note: Refer to Pg 7, Step 7, Section
B.
10. Front Speakers Installation
a. Door disassembly (See Nomenclature)
1. Remove sail panel by disengaging
snaps and pulling towards you.
2. Use panel tool to remove the
cover behind the interior door
latch. (Fig. 10-1)
3. Remove #2 Phillips screw behind
the door latch.