Owner`s manual

TOYOTA Scion tC REFERENCE 400CF
Procedure
Issue A 08/01/11 Page | 16
4. Use panel tool to remove silver
trim from grab handle. Note: Tool
insertion slot at the bottom of the
trim. (Fig. 10-2)
5. Remove the two (2) #2 Phillips
screws securing the grab handle.
6. Use a panel tool to remove the
window/door lock control panel.
Note: Insert tool between the rear
edge of the panel and the cloth
section of the trim to remove.
(Fig. 10-3)
7. Disconnect window/door lock
control connectors from the panel
and re-install back in place.
8. Use panel tool to disengage the
clips behind the door panel one at
a time. Start at the bottom, then
the sides and finish at the top.
(Fig. 10-4) Note: Use gentle force
to remove door panel.
9. Remove door latch assembly from
door panel and disconnect the
factory tweeter.(Fig. 10-5)