User Manual

ConneXions 3 V9 Mains, Two Port USA Version
CONX9ACUSA Issue 1
7
8 Replace the cover and re-tighten the four retaining screws.
9 Finally, after checking all connections, insert the mains cable supplied into the IEC type
connector located at the base of the unit and plug in to a suitable switched wall outlet. With
mains power applied, the red LED on the base of the unit should be lit.
10 The system is now ready to accept calls from the host terminal. When a call is transmitted,
the green LED on the base of the unit will light momentarily.
C
E
0
8
9
1
!
S
C
O
P
E
0
0
0
2
4
6
3
C
E