Service manual

OpenScape Business V1
Sales Information Page 9 04.06.2013
1.2.6 OpenScape Business X5W
OpenScape Business X5W is a communication system that can be wall-mounted.
OpenScape Business X5W includes a board shelf with six slot levels, which are equipped as
follows:
– Slot levels 1 through 3: each slot level provides slots for two peripheral boards
– Slot level 4: slot for the OCCM mainboard
– Slot level 5: slot for a peripheral module in SIPAC format
– Slot level 6: slots for five options
The connection of telephones, CO trunks, etc., can be made directly at the boards or via an
external main distribution frame.
The back of the board frame has the UPSC-D, which integrates the functions of a power supply
and a battery manager. No further components are required for permanent AC power supply
operation. To maintain short-term battery emergency operation after a power failure, that is, to
use uninterruptible power supply functions, you must also connect the OpenScape Business
Powerbox.
Construction data
– Dimensions (height x width x depth): approx. 450 mm x 460 mm x 200 mm
– Weight: approx. 8 kg
Ringer Equivalence Number (type plate)
– 2.6 A / 115 - 230 VAC
– 50 - 60 Hz
1.2.7 OpenScape Business X8
OpenScape Business X8 is a modular communication system that can be used as a one-box
system (base box) or a two-box system (base box + expansion box). OpenScape Business X8
can be installed as a standalone unit or mounted in a 19-inch rack.